Ackuretta SOL Quick Start Manual page 2

Package Contents
Vat (×2)
Build Platform
SOL 3D Printer
Power Cable Print Screen (+1)
Product Specifications
3D Print Technology
Machine Size
Weight
Print Size
XY Resolution
Slice Thickness
Resin Wavelength
Power Supply
Ethernet Cable
Wi-Fi Dongle
Hex Key
Monochrome LCD Panel
271.3 mm (W) x 292 mm (L) x 416.8 mm (H)
15 kg approx.
128 x 80 x 140 mm
49 μm
30 - 150μm
385 - 405 nm
110 - 240V AC, 50-60Hz
Setup Guide
Software
Download and install the Alpha 3D software from the
Ackuretta website:
https://ackuretta.com/sol/
Unboxing
1. Remove the cables, hex key, two boxes, and
packaging from the top and put them in a
safe place.
2. Lift your printer out by the handles.
3. Secure your printer by the base to remove it
from its internal packaging.
Side Boxes
There are four small boxes in the package with the
following contents:
VAT: 2x vats (one vat in place on the printer and another
with the accessories)
CABLE and TOOLS:1x ethernet cable, 1x power cable and
1x hex key (Allen wrench)
Environment
Operate your SOL in a temperature-
controlled room, between 18°- 25° C (64°- 77° F).
Ackuretta also recommends using UV-filtered LED lights in
your workspace for both printing and cleaning.
Warning
Do not allow any resin or residue to come into contact with the hood on your printer
because 3D printing resins have a corrosive effect on acrylic.