Download Print this page

Ackuretta SOL Quick Start Manual

Hide thumbs Also See for SOL:

Download this manual

Setting Up Wi-Fi

You can easily operate your SOL from your computer. You can upload prints directly,

and track print status. To set up your Wi-Fi connection:

1. Go to Network. The Wi-Fi tab is selected by default.

2. Press the Choose a Network button, select a network and key in the password.

The IP address appears on screen.

3. Make a note of the printer IP Address.

4. Select your Wi-Fi network.

Updating Firmware

Ackuretta is always adding new resins and improving functionality. If you are connected to

the Internet, check for the latest ﬁrmware:

1. Go to Settings

2. Select Update

3. Press Update ﬁrmware online

You can print either over Wi-Fi or from your USB device.

1. Go to Print

2. Select USB or Computer, depending on your

location of your ﬁle

3. Choose your IBF ﬁle

4. Change your material setting, if necessary

5. Press Print

Documentation and Support

For the full set of SOL documentation, go to:

https://ackuretta.com/sol/

For community feedback, see our Ackuretta's User Group on Facebook:

https://www.facebook.com/groups/2164055477166718/

Quick Start Guide

www.ackuretta.com

2021/06

Page 1 Setting Up Wi-Fi You can easily operate your SOL from your computer. You can upload prints directly, and track print status. To set up your Wi-Fi connection: 1. Go to Network. The Wi-Fi tab is selected by default. 2. Press the Choose a Network button, select a network and key in the password.
Page 2 Operate your SOL in a temperature- controlled room, between 18°- 25° C (64°- 77° F). 128 x 80 x 140 mm Print Size Ackuretta also recommends using UV-ﬁltered LED lights in 49 μm XY Resolution your workspace for both printing and cleaning.

94295