Advertisement
产品使用说明和注意事项
切换阀的使用方法：
1. 取下手握花洒，注意出水方向不要对准人。拉出提拉
阀的把手，打开水源，调温试水，检验淋浴器密封性。
2. 按下切换把手，切换到头部花洒出水，再次确认密闭性。
3. 按住滑座的按钮，可依据自己的要求调整滑座高度。
警告：当您使用本产品进行淋浴时，请先开启冷水然
后再开启热水，以免烫伤！
清洁护理：
1. 为保持产品洁净，请定期清洁。
2. 先用清水或温和的液体清洁剂清洗，然后用清水冲洗，
再用软棉布抹干。
3. 切勿使用任何具有酸性和研磨作用的清洁剂。
4. 切勿使用钢丝球等坚硬的物品清洗产品表面。
Usage Instructions and Caution
Usage of Diverter:
1. Take off the hand shower, and do not let the water
towards people. Pull out the handle of diverter valve,
turn on the water source, adjust the water temperature,
and check for any leaks.
2. Press the diverter handle, switch to the showerhead
output, and check for any leaks.
3. Press the bracket button, then you can adjust the height
of the bracket as required.
Warning: When you are showering, please turn on
the cold water first, and then hot water
to avoid scalding.
MAINTENANCE:
1. Keep the product clean with clean water or mild liquid
detergent regularly.
2. Rinse with clean water, and wipe with soft cotton.
3. Acid or abrasive detergents are prohibited.
4. Steel ball or hard materials are prohibited.
5
Advertisement
