Download
Share
Print this page
In-situ Partech ChemScan RDO-X Stainless Steel Instructions
  1. Manuals
  2. Brands
  3. In-situ Manuals
  4. Accessories
  5. Partech ChemScan RDO-X Stainless Steel
  6. Instructions

In-situ Partech ChemScan RDO-X Stainless Steel Instructions

Hide thumbs
1
2
3

Advertisement

Quick Links

Download this manual
Attach the Twist-Lock
1
cable to the probe.
Connect the instrument to the Twist-Lock cable
and twist until it clicks into place.
Power up the Control
3
Point 2.0 or 7300w2.
Reinstall the terminal cover. Connect power to
the controller and turn it on. Press Menu.
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, HydroVu™, iSitu,
Pocket-Situ, RDO, RuggedCable, RuggedReader, SmarTROLL™, TROLL, VuSitu, and Win-Situ are trademarks or registered
trademarks of In-Situ Inc.
2016. All rights reserved. This product may be covered by patents identified at www.in-situ.com/
©
patents
RDO-X Stainless Steel Instructions
2
Remove the cover from the Control Point 2.0
(also compatible with the Partech 7300w
Monitor). Wire the cable into the terminals
4
4
Configure.
Use the arrow keys to select Sensor Config.
Wire the other end of
the cable.
2022-05-11 | 2000382
2

Advertisement

loading
Need help?

Need help?

Do you have a question about the Partech ChemScan RDO-X Stainless Steel and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for In-situ Partech ChemScan RDO-X Stainless Steel

Summary of Contents for In-situ Partech ChemScan RDO-X Stainless Steel

  • Page 1 Reinstall the terminal cover. Connect power to the controller and turn it on. Press Menu. Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, HydroVu™, iSitu, Pocket-Situ, RDO, RuggedCable, RuggedReader, SmarTROLL™, TROLL, VuSitu, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.
  • Page 2 Align the flat edge Replace the guard the guard. cap away from the inside the cap with and calibrate the instrument. Do not the flat edge on the instrument. twist cap. instrument. Slide the new cap into place. 1-970-498-1500 www.in-situ.com...
  • Page 3 Use Use only the supplied instrument. Alconox or vinegar to lens cloth to clean lens. remove build-up. Get complete instructions about calibration, logging and working with data in the product manual. Download it from www.in-situ.com. 1-970-498-1500 www.in-situ.com...