Parts Diagram & List - Pelsue Airpac15 Product Manual

3.1 Parts Diagram & List
Refer to the following parts breakdown diagram (Fig. #3.1a) and the accompanying table for identification of parts in
the event replacements become necessary. The parts identification table displays applicable part numbers, descrip-
tions, and quantity per assembly.
**Refer to parts list below if replacement parts are required. Replacement parts can be ordered from the T.A. Pelsue
Company at 800-525-8460.
5
3
4
Replacement Parts Identification Table
(Refer to Figure 3.1a)
Item Part
Number Number Description
1 114762-001 Canister - Hose, Molded
2 100743-001 (AIRPAC15) Hose - Blower, High Retraction, 8" Dia. x 15' Long
100743-002 (AIRPAC25) Hose - Blower, High Retraction, 8" Dia. x 25' Long
117373-001 (AIRPAC15-S) Hose - Blower, Collapsible Midsection, 8" Dia. x 15' Long (Spacemaker) (Refer to Pg. 14 Fig. 5.2e)
"THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT
117373-002 (AIRPAC25-S) Hose - Blower, Collapsible Midsection, 8" Dia. x 25' Long (Spacemaker) (Refer to Pg. 14 Fig. 5.2e)
TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN PART TO ANY-
ONE WITHOUT THE PERMISSION OF THE T.A. PELSUE COMPANY."
3 114764-001 Collar - Hose Attachment, Spinning, Aluminum
4 100188-001 Foot - Rubber, 3/4" OD, w/ Washer
5 114977-P01 Plate - Attach & Detach Instructions, Black on Aluminum
6 118972-001 Retainer - Hose Carrier, Nylon Webbing
Page 8
6
1
Figure 3.1a: Pelsue Airpac
Parts Diagram
RIVET
Figure 3.1b: #114977-P01
Plate - Attach/Detach Instructions
2
zONE REV.
ALL
#124313-001 - Product Manual: Model #Airpac15, 15-S, 25, 25-S - Revision 00 - Date: 05-18-2009
UNLESS OTHERWISE SPECIFIED CONTRACT NO.
DIMENSIONS ARE IN INCHES
reVISIONS
DESCRIPTION
00 ISSUED FOR FABRICATION
2500 SOUTH TEJON STREET
DATE B Y
05-13-09 CHAU