Page 1
Part #124313-001 Product Manual: Pelsue Airpac Model #Airpac15, #Airpac25, #Airpac15-S, #Airpac25-S Attachable Hose Canister IS O 9 0 0 1 Certified T.A. Pelsue Company 2500 South Tejon Street Englewood, Colorado, USA 80110 Tel. 800-525-8460 or 303-936-7432 Fax. 303-934-5581 Internet: www.pelsue.com...
Page 3
Pelsue continues the dedication that industry throughout the world. has made us pre-eminent in this field. Page 3 #124313-001 - Product Manual: Model #Airpac15, 15-S, 25, 25-S - Revision 00 - Date: 05-18-2009...
EVERY T.A. PELSUE COMPANY EMPLOYEE IS ExPECTED TO COMMIT TO THIS PHILOSOPHY IN THE PERFORMANCE OF HIS OR HER DAILY TASkS. QUALITY FIRST! T.A. PELSUE COMPANY SENIOR MANAGEMENT TEAM Page 5 #124313-001 - Product Manual: Model #Airpac15, 15-S, 25, 25-S - Revision 00 - Date: 05-18-2009...
3.0 - Configuration & Assembly Upon initial receipt of the Pelsue Airpac Hose Canister, inspect the packaging for any evidence that the product may have been damaged in shipment. While unpacking the product, inspect all of the components for damage. If damage to any of the components is discovered, Alert the shipping carrier immediately of the damage to the shipment.
The parts identification table displays applicable part numbers, descrip- tions, and quantity per assembly. **Refer to parts list below if replacement parts are required. Replacement parts can be ordered from the T.A. Pelsue Company at 800-525-8460.
You are responsible for the safe operation of your Pelsue Airpac. You must ensure that anyone who will operate or work around the equipment be familiar with confined space ventilation procedures. This manual will take you step-by-step through the workings and capabilities of the Pelsue Airpac Hose Canister and alert you to all good safety and operating practices while using the system.
! CAUTION ! - The user must ensure that the blower is located where it cannot fall into water inadvertently and the extension cords or plug connections do not lay in water. Page 10 #124313-001 - Product Manual: Model #Airpac15, 15-S, 25, 25-S - Revision 00 - Date: 05-18-2009...
5.1 - Product Description & Capabilities The Pelsue Airpac is built from a high density polyethylene housing, which has a high resistance to chemicals and extreme temperatures, and internal steel components. The Pelsue Airpac is specifically designed to be used in conjunction with the Pelsue #1325 Series &...
It is necessary to perform a visual inspection, each time, prior to using the product. If deficiencies are found, remove the product from service and contact the T.A. Pelsue regarding repair. The following checklist coupled with Figure #5.2a should be used as a guide to determine whether the equipment is in good operating condition prior to usage. Equipment that is not in good condition can endanger the safety of the entrant and attendant during use.
Page 13
Ensure that the blower provides positive airflow the entire time during usage. The axial blower can be used with an accessory Pelsue Air Flow Alarm (#123717-001) in order to alert the entrants that positive ventilation is lost.