Table of Contents
Advertisement
The following section will address the capabilities and the general operation of the Pelsue Airpac. The instructions
contained within this section should be adhered to each and every time the product is used. Any person tasked with
installing or operating the piece of equipment should be familiar with these procedures.
The Pelsue Airpac is built from a high density polyethylene housing, which has a high resistance to chemicals and extreme
temperatures, and internal steel components. The Pelsue Airpac is specifically designed to be used in conjunction with
the Pelsue #1325 Series & #1400 Series Axial blowers for confined space applications. All specifications, instructions,
and procedures provided within this manual or upon Pelsue Specification Documents are based upon and only valid
for usage with Pelsue accessories. The T.A. Pelsue Company can not verify equipment safety and/or compliance when
utilized with anything other than Pelsue approved confined space accessories.
Hose Canister - Pelsue Airpac
General Specifications
• Weight
• Height
• Width
• Length
Features:
• Low Maintenance
• Specifically designed to attach & detach with
specified Pelsue axial blowers
• "Spacemaker" versions of the ventilator hoses
allow for a bend for easier entry and exiting
through manholes
Materials & Construction
• Main Structure:
• Hardware
• Hose
model Specifications
• High Retraction Hose - Galvanized Spring Steel throughout entire length of hose
• Collapsible Hose (Spacemaker) - 4' long collapsible section in 5' increments
#124313-001 - Product Manual: Model #Airpac15, 15-S, 25, 25-S - Revision 00 - Date: 05-18-2009
-
20 LBS.
-
15-3/4"
-
10-5/8"
-
24-5/8"
- High Density Polyethylene Housing
- Plated Steel
- High Temp Polyester w/ PVC Polymer, Galvanized Spring Steel Helix w/ Nylon Wear Strip
5.0 - Product Operation
5.1 - Product Description & Capabilities
Figure #5.1a: Pelsue Airpac
Stored Hose
Page 11
Advertisement
Table of Contents
