Summary of Contents for Daan Tech VOLTZ TOYS DG86388
Page 1
CONTACT US Before returning your product, please contact us first! Voltz Toys Customer Service can assist you with any replacement parts, damages, or defective issues reported. You can contact us directly at www.voltztoys.ca. A subdivision of The DAAN Groups Email: help@voltztoys.ca Phone number: 1-888-338-6589 Head Office: Unit 7-3600A Laird Rd, Mississauga, ON, L5L USER MANUAL...
Page 2
Please read the manual before using the product. The manual and carton contain important information. Please keep the manual for later references. Failure to follow the instructions in the manual may result in damages, acci- dents, or defective issues with the product. To improve the product and quality, we may alter the structure, appearance, packing method, assembly method, and product function without any no- tice.
PRODUCT SPECIFICATION Car Model Parameters Battery 12V4.5AH/12V7AH Suitable age 37-95 months Weight Limit 25 kg Product Size 108 x 62 x 40cm Speed 3-5 km / hour Runtime 8-12 hours (to charge), 60-80 minutes (while using) AC 100V-240V (input) Charger DC 12V500mA/12V1000mA (output) Electric Motor 12V390 x 2 (drive) 12V380 x 1 (turn)
ASSEMBLY INSTRUCTIONS 1. WHEEL ASSEMBLY Parts required: #2, #4, #11, #13 Before assembling the wheels, please pay attention to the front and rear wheels. The rear wheels will have the motor insert tips on the backside, whereas the front will be flat. a.
2. STEERING WHEEL ASSEMBLY Parts required: #3 The steering column will include a connector for the steering wheel. Con- nect the steering wheel to the steering column. Turn the steering wheel to the correct position, and insert firmly to clamp into the steering column. 3.
4. POWER CONNECTION Parts required: # N/A At the seating area, locate the battery. Connect the battery wire into the bat- tery terminal. Turn on the power on the dashboard to enable power. 5. SEAT ASSEMBLY Parts required: #7 On the seating area, remove the screws from the car body. Align the seat in its corresponding slot, and fix with screws to secure it.
Page 9
6. REARVIEW MIRROR ASSEMBLY Parts required: #8 Distinguish the left and right side mirrors. Insert the side mirror into the car body. Push firmly into the corresponding slots to secure.
REMOTE CONTROL INSTRUCTION 2.4GHz Remote Control Pairing Procedures 1. To pair the remote with the vehicle, install two AAA 1.5V batteries. Un- screw and push the battery cover open on the back of the remote. Please pay attention to the positive and negative polarity in the battery holder.
Page 11
WARNING 1. When operating the car with the remote, the distance between the car to remote should not exceed 10m range. 2. The remote is provided for adult’s to operate. Keep away from children. 3. Before using the remote, carefully read the instruction manual, ensuring all functions are reviewed properly before operating.
How to insert batteries: Use a screwdriver to unscrew the back cover of the remote. Install two AAA 1.5V alkaline type batteries according to the diagram (batteries not included). Fix the battery cover with a screw. How to remove batteries: Use a screwdriver to unscrew the back cover of the remote.
Page 13
WARNING 1. The assembly of the car must be done by an adult. When unassembled, it contains potentially hazardous parts that are sharp or small. Please keep out of children’s reach. 2. Choking hazards of small parts. 3. Not for children under 36 months. Recommended for 36-96 months. 4.
MAINTENANCE AND SERVICE 1. Before using, adults are responsible for reviewing the product and es- sential parts are in a functional condition. Check whether screws are loose or other potential hazards. Any damaged or defective parts must be repaired or resolved before using. 2.
14. Low batteries should be removed from the car and kept away from chil- dren. 15. Disconnect the batteries when completely inactive or discontinued. Do not let children use the car in this state. TROUBLESHOOTING...