Connection And Operation - Intermec EasyCoder 101 Supplementary Manual

1. Connection and Operation

EasyCoder F/XP-Series
EasySet Bar Code Wand Setup
Edition 1, November 2001
Part No. 1-960560-00
Intermec EasyCoder F/XP-Series – EasySet Bar Code Wand Setup, Ed. 1
1. Connect the optional EasySet bar code wand to the receptacle
on the printer's rear plate.
2. Read the appropriate bar code to set up the printer. Hold the wand
like a pencil and move it swiftly across the bar code.
3. When the bar code has been accepted, the printer emits a
short beep and the "Ready" control lamp on the printer's
front blinks briefl y.
Chapter 1
Connect
here!
1