Using The Water Pipe For Cleaning; Cleaning Of Parts That Come In Contact With The Ice Cream - Valmar SNOWY TTi Manual

13.3 USING THE WATER PIPE FOR CLEANING

In order to clean or rinse-off the appliance or its parts, one can help oneself with
the shower, which is mounted on the top side panel of the machine.
The shower must be connected to fresh (drinkable) water supply (see the
chapter on connecting the appliance).
How to use the shower:
grab the shower handle and pull it out;
point it towards those parts of the appliance, which need to be cleaned or
rinsed-off and open the water valve (in counter clockwise direction);
FLEXIBLE HOSE
(code – 10 422 013)
close the water valve (in clockwise direction) and place the shower back
to its place
In the case of wear or pipe breakage of the shower, the pipe of the shower must
be replaced.
Only original pipes must be used! Only in this way we can assure a well
and normal working water shower!
13.4 CLEANING OF PARTS THAT COME IN CONTACT WITH
THE ICE CREAM
All parts, which come into contact with ice cream mixture, must be cleaned
before and after every use. With regular cleaning practice you comply with
standards of hygiene and ensure ice cream mixture treating quality.
13.4.1 CLEANING OF CYLINDER (ICE CREAM )
Cleaning process:
make sure that the mixture treating control panel is in STOP state;
make sure that the ejection opening is well closed;
open the cylinder cover and pour approximately 10 cm of water into the
cylinder;
close the cylinder cover;
press the MIXING key;
64