To-Do List Before Operating The Appliance; Cleaning Of The Appliance; Instructions For The Prevention Of Injuries - Valmar SNOWY TTi Manual

Table of Contents

Advertisement

12.5 TO-DO LIST BEFORE OPERATING THE APPLIANCE

Before each use of the appliance:
make sure that the floor around the machine is not slippery or wet;
make sure that the water supply valve is open;
make sure that FUSES are securely in place and switched on;
make sure that the MAIN SWITCH is turned on;
make sure that there are no objects of any kind in the mixture treating
cylinder or on to he machine;
clean the mixture production cylinder;
disinfect the mixture production cylinder;
make sure that there are no objects of any kind in the mixture prodiuce
cylinder.
The appliance must be clean and disinfected before it may be used for ice
cream production.
Ice cream mixture must be of appropriate quantity and quality to obtain optimum
results. Ingredients for ice cream of desired quality contain additives to reduce
friction between the mixer and the cylinder.
The quantity of ice cream mixture must be measured according to technical
characteristics of the appliance.Follow the below specifications for minimum
and maximum quantities allowed in the production cylinder:
Model
SNOWY 5 TT-i
SNOWY 7 TTi
SNOWY 12 TTi
SNOWY 16 TTi
Note this that 1 liter of ice cream mixture is equivalent us 1,1 kg!

13 CLEANING OF THE APPLIANCE

13.1 INSTRUCTIONS FOR THE PREVENTION OF INJURIES

Only authorized persons, who know how the machine is operated, must be
allowed to clean it. Operators must be familiar with all regulations concerning
occupational safety and fire safety measures, and they must know where fire
extinguishers are located.
Persons still in training must be constantly supervised by a designated person
in charge who knows how the machine works.
Operators, who clean the appliance must be dressed suitably (no ties, jewellers
chains or belts that could get caught in the machine) and be appropriately
protected.
All warning labels on the appliance must be replaced with new ones when they
begin to fade or if they become damaged.
Before cleaning the appliance, the operator must make sure that the appliance
is not under maintenance, in service or in cleaning. At the end of the shift, the
min. Quantity (kg)
max. Quantity (kg)
1
1,5
2
3
62
optimum quantity (kg)
5
7,5
12,5
16,5
4
5
10
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multy hp tti

Table of Contents