Advertisement
Step 1
Assemble your unit on a carpeted fl oor or on the empty carton to avoid scratching your unit or the fl oor.
å
Turn four BLACK 9/16" FLAT HEAD SCREWS (32S) into the ENDS (A and B) until the shoulders of the SCREWS rest on
å
the surfaces of the ENDS.
NOTE: Do not overtighten the SCREWS.
å
Slide the END MOLDINGS (D) onto the ENDS (A and B). Line up the grooves in the MOLDINGS over the heads of the
å
SCREWS in the ENDS.
NOTE: The MOLDINGS should be even on both edges of the ENDS.
å
NOTE: If the MOLDING comes up off of the SCREWS, remove it and slide it on again.
å
www.sauder.com/service
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
A
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
32S
D
B
427307
0
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
Shoulder
D
Page 5
Advertisement
