Page 1
CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE RETAILER. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-445-1527 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 9 a.m.
Page 2
Table of Contents Assembly Tools Required Part Identification No. 2 Phillips Screwdriver Hardware Identification Tip Shown Actual Size Hardware Usage Guide Assembly Steps 6-25 Hammer Not actual size Français 26-28 Español 29-31 Safety 32-34 Warranty Page 2 www.sauder.com/service 427970...
Page 3
DRAWER BOX FRONT (2) FOOT (2) LEFT END (1) RIGHT DRAWER SIDE (2) FRONT/BACK BRACE (2) RIGHT END (1) DRAWER FRONT (2) MIDDLE BOTTOM BRACE (1) BRACE (1) DRAWER BOTTOM (2) TOP BRACE (1) BACK (2) DRAWER BRACE (2) 427970 www.sauder.com/service Page 3...
Page 4
1" HEX HEAD SCREW - 10 1-3/16" FLAT HEAD SCREW - 16 7/8" PAN HEAD SCREW - 12 1/2" PAN HEAD SCREW - 9 1/2" HEX HEAD SCREW - 4 3/8" PAN HEAD SCREW - 28 Page 4 www.sauder.com/service 427970...
Page 5
The arrow in the HIDDEN CAM must point Arrow toward the hole in the edge of the board. Hidden Cam Hole Insert the CAM SCREW or CAM DOWEL into the HIDDEN CAM. Tighten the HIDDEN CAM. 427970 www.sauder.com/service Page 5...
Page 6
Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
Page 7
Step 2 å Fasten the INTERLOCK MECHANISM (10) to the LEFT END (C). Use three BLACK 1/2" PAN HEAD SCREWS (18). 1/2" PAN HEAD SCREW (3 used in this step) 427970 www.sauder.com/service Page 7...
Page 8
NOTE: The EXTENSION SLIDES will be used later for the DRAWERS. 3/8" PAN HEAD SCREW (16 used in this step) Open end Push the black lever in and pull the SLIDE from the RAIL. Open end Open end Page 8 www.sauder.com/service 427970...
Page 9
BACKS (F). å Insert two WOOD DOWELS (5) into one of the BACKS (F). å Push the BACKS (F) together. å NOTE: Be sure the WOOD DOWELS in the BACK insert into the other BACK. Arrow Arrow 427970 www.sauder.com/service Page 9...
Page 10
D E N H I D i t h f a c S u r S u r f a c i t h o u t H I D D (6 used) Page 10 www.sauder.com/service 427970...
Page 11
Step 6 å Turn four CAM SCREWS (4) into the TOP (A). 427970 www.sauder.com/service Page 11...
Page 12
Fasten the TOP (A) to the ENDS (C and D). Tighten four HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the TOP insert into the ENDS. i t h f a c S u r Page 12 www.sauder.com/service 427970...
Page 13
NOTE: Be sure the WOOD DOWELS in the BOTTOM insert into the ENDS. (2 used) o l e r e h i t h f a c S u r 1-9/16" FLAT HEAD SCREW (4 used in this step) 427970 www.sauder.com/service Page 13...
Page 14
Fasten the FEET (P) to the BRACES (Q and R). Tighten six 1" HEX HEAD SCREWS (16) using the L-WRENCH (9). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 1" HEX HEAD SCREW (6 used in this step) Page 14 www.sauder.com/service 427970...
Page 15
L-WRENCH (9). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 1/2" HEX HEAD SCREW (4 used in this step) 1" HEX HEAD SCREW (4 used in this step) 427970 www.sauder.com/service Page 15...
Page 16
Turn two CAM SCREWS (4) into the DRAWER BACK (G) and DRAWER FRONT (K). å Repeat this step for the remaining DRAWER BACK (G), DRAWER FRONT (K), and DRAWER BRACE (N). Arrow (4 used) (4 used) Arrow Page 16 www.sauder.com/service 427970...
Page 17
Flip the DRAWER onto into its bottom edges. å Push the FILE GLIDES (7 and 12) onto the DRAWER BACK (G), DRAWER BOX FRONT (H), and DRAWER SIDES (J and O). å Repeat this step for the remaining drawer. 427970 www.sauder.com/service Page 17...
Page 18
NOTE: Be sure the WOOD DOWELS in the DRAWER BRACE and DRAWER SIDES insert into the DRAWER FRONT. å Repeat this step for the remaining drawer. Be sure the DRAWER BOTTOM inserts into the DRAWER BACK groove. Surface with HIDDEN CAMS (12 used) Page 18 www.sauder.com/service 427970...
Page 19
Fasten the DRAWER FRONT (K) to the DRAWER BOX good time to refresh FRONT (H). Use six 7/8" PAN HEAD SCREWS (17). your drink. å Repeat this step for the remaining drawer. 7/8" PAN HEAD SCREW (12 used in this step) 427970 www.sauder.com/service Page 19...
Page 20
Step 15 å Fasten a PULL (8) to the DRAWER FRONT (K). Use two 1-1/4" MACHINE SCREWS (14). å Repeat this step for the remaining drawer. 1-1/4" MACHINE SCREW (4 used in this step) Page 20 www.sauder.com/service 427970...
Page 21
Fasten the EXTENSION SLIDES (2) to the DRAWER SIDES (J and O). Use six 3/8" PAN HEAD SCREWS (20) through the exact holes shown below. å Repeat this step for the remaining drawer. Open end 3/8" PAN HEAD SCREW (12 used in this step) Open end 427970 www.sauder.com/service Page 21...
Page 22
NOTE: The DRAWER ACTUATOR in the bottom holes will be the TOP DRAWER, and the DRAWER ACTUATOR in the top holes will be the BOTTOM DRAWER. TOP DRAWER 1/2" PAN HEAD SCREW (6 used in this step) BOTTOM DRAWER Page 22 www.sauder.com/service 427970...
Page 23
The drawer will push in hard until it is all the way in, then it will slide in and out easier. BOTTOM DRAWER 427970 www.sauder.com/service Page 23...
Page 24
RAILS on the unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the way in, then it will slide in and out easier. TOP DRAWER Page 24 www.sauder.com/service 427970...
Page 25
NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or 35 lbs. 427970 www.sauder.com/service...
Page 26
REFERENCE DESCRIPTION QUANTITÉ REFERENCE DESCRIPTION QUANTITÉ conserver le livret pour future référence. Pour contacter Sauder en DESSUS ................1 (ENSEMBLE DE GLISSIÈRE ILLUSTRÉ À PART) ce qui concerne cet DESSOUS ................1 GLISSIÈRE D'EXTENSION ........4 élément, faire référence EXTRÉMITÉ GAUCHE ..........1 COULISSE D'EXTENSION ........4 au numéro de lot et...
Page 27
(E) et les ARRIÈRES (F). Insérer deux CHEVILLES EN BOIS (5) dans l’une des ARRIÈRES (F). Enfoncer les ARRIÈRES (F) ensemble. REMARQUE : S’ a ssurer de bien insérer les CHEVILLES EN BOIS de l’ARRIÈRE dans l’ a utre ARRIÈRE. 427970 www.sauder.com/service Page 27...
Page 28
Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. Répéter cette étape pour l'autre tiroir. ÉTAPE 15 Fixer une POIGNÉE (8) au DEVANT DE TIROIR (K). Utiliser deux VIS À MÉTAUX 32 mm (14). Répéter cette étape pour l'autre tiroir. Page 28 www.sauder.com/service 427970...
Page 29
PANEL SUPERIOR ............1 (JUEGO DE EXTENSIÓN SE MUESTRA POR su referencia futura. Si SEPARADO) necesita ponerse en FONDO .................1 contacto con Sauder en RIEL DE EXTENSIÓN ..........4 EXTREMO IZQUIERDO ..........1 cuanto a esta unidad, CORREDERA DE EXTENSIÓN ......4 EXTREMO DERECHO ..........1 refiérase al número...
Page 30
Inserte dos PASADORES DE MADERA (5) en uno de los DORSOS (F). NOTA: Debe apretar cada TORNILLO unas vueltas antes de apretar cualquier tornillo firmemente. Empuje los DORSOS (F) juntos. NOTA: Asegúrese de que los PASADORES DE MADERA fijados al DORSO se inserten en el otro DORSO. Page 30 www.sauder.com/service 427970...
Page 31
Esto completa el ensamblaje. Limpiar con un trapo húmedo. Fije un TIRADOR (8) a la CARA DE CAJÓN (K). Utilice dos Seque con un paño. TORNILLOS PARA METAL de 32 mm (14). Repita este paso para el otro cajón. 427970 www.sauder.com/service Page 31...
Page 32
• This product is not designed to support a designed to support a television is heavy. Plus the weight and location of the television. hazardous. picture tube tends to make TVs unbalanced and prone to tipping forward. Page 32 www.sauder.com/service 427970...
Page 33
Les téléviseurs peuvent être très un téléviseur. téléviseur. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. 427970 www.sauder.com/service Page 33...
Page 34
Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y hacerlos propensos a volcarse hacia adelante. Page 34 www.sauder.com/service 427970...
Page 35
à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
Page 36
BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.