Table of Contents
Advertisement
On screen messages
Message
All tuning data will be erased
Are you sure ?
Are you sure you want to delete this timer ?
Press OK to delete timer.
Press RETURN to return.
Bad signal
Child Lock is active!
Press OK to enter PIN.
Feature not available.
Feature not available.
Press OK to view how it works.
Found new software version ***.
Press OK to start update
(may take 40 mins)
or Press EXIT to ignore
and you can update when TV is in standby
Invalid operation - Please check settings
and connections.
Invalid system time. Please exit !
Invalid system time, Timer Programming
will not work.
Please press TV button on remote control
and check time display on Banner
Max. number of timers already set !
New channels found!
Press OK to update channel list
Press EXIT to ignore.
No channel found.
Please check aerial or local signal
availability. Press OK to start Auto Setup.
No module inserted
No recording - Already recording
No recording - Check media
No recording - Playing
No recording - Unknown reason
No service
No signal
PIN incorrect!
Please check settings and connections
on HDMI devices.
Please wait.
Recording this channel now
Reset to Factory Shipping Condition
Completed. Please switch off TV.
Sending Preset Data
68
Meaning / Action
"Shipping Condition" will erase all tuning data (p. 44).
Confirm correct operation.
Confirm correct operation.
The signal is weak. Check the aerial is plugged in properly. It may be
necessary to have an aerial installer check the signal and aerial alignment.
Reset channels. (p. 34 and p. 35)
The selected channel is locked in Child Lock (p. 42). You must enter the
PIN number before the channel will be displayed.
It is not possible to record from COMPONENT or HDMI. Connect the recorder to
the TV using a fully wired SCART cable for recording from the TV tuner.
Confirm Q-Link or VIERA Link settings (p. 52 - p. 53)
The selected feature on VIERA TOOLS is not available. Press the OK
button to view the demonstration to explain how to use it.
There is a new software available.
Check the Q-Link or VIERA Link connection and setting (p. 52 - p. 53).
Cannot get the time information and cannot edit Timer Programming
screen. Check the connection of the RF cable.
Cannot get the time information. If there is no time displayed on the
Information banner, check the connection of the RF cable.
The maximum number of timer programming events is 15.
There may be new channels available.
This message will appear each time a change is made by the broadcasters.
This message can be deactivated by setting "New Channel Message" to Off
in "DVB Tuning Menu". Selecting OK will perform "Update Channel List".
Follow the on screen instructions.
Please also refer to p. 66.
If channels are still not found, consult your local Panasonic dealer.
Check the CI module is inserted completely (p. 46).
The equipment may already be recording.
The tape or disc may be "write protected", fully missing or damaged.
The equipment may be playing the tape or disc.
The recording may not be performed. Check the equipment.
The broadcaster has stopped the service. Check the channel in the TV
Guide. (p. 18 and p. 19)
The TV cannot detect the signal. Check the connection of the RF cable.
The PIN number you entered is wrong.
Communication error in VIERA Link function (p. 55).
A function is in progress.
The recorder is recording the programme from its own tuner. You can turn
the TV off and leave the equipment recording in the normal way.
"Auto Setup" will automatically start when Mains power On / Off switch is
next turned On. (p. 12)
Q-Link or VIERA Link channel download is in progress.
Advertisement
Table of Contents
