Table of Contents
Advertisement
User Manual EtherCAT Slave / DeviceNet Slave
Document code: MN67E10_ENG
Revision 1.000
Page 12 of 24
Industrial Electronic Devices
USE OF COMPOSITOR SW67E10:
To configure the Converter, use the available software that runs with Windows called SW67E10. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launching the SW67E10, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW67E10
ADFweb.com S.r.l.
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67E10-A1 and is the answer not in the manual?