Ebyte NT1-B User Manual page 14

Chengdu Ebyte Electronic Technology Co.,Ltd.
Step 2: The webpage pops up the main interface, and you can query and set relevant parameters;
Step 3: Click Submit to save the configuration parameters after entering the correct key. The factory default
key is: 123456;
Step 4: The progress bar indicates the configuration progress. Do not refresh the web page again after the
configuration is completed (refresh the web page to enter the configuration mode again, you can restart the device
or submit it again to enter the communication mode);
Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd.
NT1-B_User_Manual
11