Electrical Connection - Buffalo DW467 Instruction Manual

Electrical Connection

This machine has a molded U.K type plug BS1363.
Chemical Feeders Priming
Your Buffalo Glass Washer has a detergent pump and a rinse-aid pump for use with
containers of NON-FOAMING liquid detergent.
1. Insert the hoses of the pumps in the correct chemical container (clear tube for
detergent, blue tube for rinse aid).
2. Ensure both of the hoses are at the bottom of the containers of the chemicals.
Note - The chemicals to be used should be suitable for Glass Washers. The detergent shall be
the No Foam type, suitable for Glass Washing machines.
Note - We recommend that you use detergent and rinse aid from the same manufacturer.
Jantex Glasswash detergent (CF978) & Jantex Glasswash rinse aid (CF979) are
recommended.
Note - When the machine is installed from new or when the containers are allowed to run
dry, the full priming takes place after 8-10 washing-rinsing cycles.
Detergent and Rinse Aid Pump Adjustment
1. Open the stainless steel front cover (remove 2x screws).
2. The pumps are ready for adjustment.