Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Buffalo DK772
Summary of Contents for Buffalo DK772
- Page 1 GLASSWASHER USER MANUAL Models DK772 DK773...
-
Page 2: Safety Instructions
Competent Person. Testing should include, but not be limited to: Visual Inspection, Polarity Test, Earth Continuity, Insulation Continuity and Functional Testing. • Buffalo recommend that this product is connected to a circuit protected by an appropriate RCD (Residual Current Device). - Page 3 Water Drain Hose Instruction Manual BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
- Page 4 Device Dimensions DK772 Glasswasher...
- Page 5 DK773 Glasswasher...
-
Page 6: Installation Dimensions
Installation Dimensions DIMENSIONS:(mm) DW 772 DW 773 Height (A) Widht (B) Depth (C) Installation Location Height (D) Installation Location Widht(E) Installation Location Depth(F) Installation - Water Connection Note - Plumbing connections must be made in such way that will allow the machine to be removed for service and cleaning. - Page 7 Use of Detergent and Rinse Aid in the Dishwasher Your Buffalo Glass Washer has a detergent pump and a rinse-aid pump for use with containers of NON- FOAMING liquid detergent. 1. Insert the hoses of the pumps in the correct chemical container (clear tube for detergent, blue tube for rinse aid).
- Page 8 Priming Detergent and Rinse Aid When using for the first time or if the detergent / rinse aid is allowed to run dry, detergent and rinse aid hoses will be full with air. To prime detergent and rinse aid hoses use the following instructions - Note: Please use this option after the machine has reached the required temperature values.
-
Page 9: Operation Of The Appliance
Washing and Rinsing Water Temperatures Water temperatures can be adjusted. During production, the appliance is set to the following temperature values. The temperature should not be set higher than these temperatures. Operation of the Appliance Getting to know the appliance: To understand the information in the user manual correctly, the main parts of the appliance should be known, see below. -
Page 10: Starting The Appliance
Operation Control Panel Before starting the appliance, familiarise operators with the control buttons and signal items on the front panel. In addition operators should be familiar with the location of power and water cut-off switches. Starting the Appliance Make sure that the electricity, water and drain installations are complete. Wait for the “On/Off switch” on the front panel to light, then keep it pressed for 3 seconds. -
Page 11: Accessing The Settings Menu
When the boiler gets to 60C, heated water is sent to the washing tank. This process continues until the washing tank is fully filled. After the washing tank is fully filled, the machine waits for the boiler and washing tank set temperatures to be reached. -
Page 12: Changing Parameters
Changing Parameters Access the settings Menu. Choose the program that you want to change Use settings icons change the parameters Hold for 3 seconds to confirm changes Note: If the changes made are to be valid in all programs, the same setting values must be entered for each program By using the settings menu you can change the following –... -
Page 13: Preparation For Use
Preparation for Use At initial start up of the appliance, wait 20-30 min (depending on the dishwasher model) for the supplied water to warm up. After the water temperature reaches ‘Factory Settings’ warning sound will ring. Appliance is designed to function efficiently when proper temperatures are reached. - Page 14 Draining Excess water generated during the operation of the machine will be automatically removed via the drain. At the end of each day the door should be left open to drain and dry. Before the machine is turned off at the end of the day the boiler water must be completely drained.
-
Page 15: Daily Maintenance
Cleaning and Maintenance Periodical Maintenance and Clean-up Maintenance should be carried out by trained personnel in accordance with the safety instructions. Daily Maintenance • Washing arms should be disconnected and any debris should be removed using water and a nylon brush •... -
Page 16: Troubleshooting
Glasses may require pre- Pre Wash glasses washing if excessively soiled. White marks on glasses can be Contact your Buffalo distributor for caused by hard water details on using the necessary water softener. Appliance cannot be switched... -
Page 17: Electrical Wiring
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO. Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right to change specifications without notice.