Buffalo DW467 Instruction Manual page 15

Converting Single phase 30A to Single Phase 13A
1. REMOVE THE TWO RED CABLES FROM THE LEFT SIDE AND THE TWO WHITE
CABLES FROM THE RIGHT SIDE OF THE HEATING ELEMENT OF THE BOILER.
2. REMOVE THE TWO RED CABLES FROM THE CONTACT 1
WHITE CABLES FROM THE CONTACT 5
CHANGE THE POSITION OF THE BLUE CABLE FROM THE CONTACT 13NO TO 5
3. REPLACE THE POWER SUPPLY CABLE FROM 3X10mm2 TO 3X1,5mm2
Power
Supply Cable
3 x 10mm2
OF THE MAGNETIC CONTACTOR.
L3
Power
Supply Cable
3 x 1.5mm2
AND THE TWO
L1
L3