Servicing The Appliance; Changing The Plug - Russell Hobbs SECK43 Instructions And Warranty

● Store the appliance in its box or in a clean, dry place.
● Never store the appliance while it is still wet or dirty.
● Never wrap the power cord around the appliance.

SERVICING THE APPLIANCE

There are no user serviceable parts in this appliance. If the unit is not operating correctly, please check the
following:
● You have followed the instructions correctly
● That the unit has been wired correctly and that the wall socket is switched on.
● That the mains power supply is ON.
● That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the problem and you need
to return the appliance, make sure that:
● The unit is packed carefully back into its original packaging.
● Proof of purchase is attached.
● A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised service agent, in order
to avoid any hazard. If service becomes necessary within the warranty period, the appliance should be
returned to an approved Home of Living Brands (Pty) Limited service centre. Servicing outside the warranty
period is still available, but will, however, be chargeable.

CHANGING THE PLUG

Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on the stated current only. Connecting to other power sources may
damage the appliance. Connect a three-pin plug as follows:
8