Interrupting Programme; Terminate Programme; Switching Off Appliance - Siemens SR61HX08KE Information For Use

Table of Contents

Advertisement

a While the programme is running, a
spot of light is projected onto the
floor below the appliance door.
This light will not be visible if the
appliance is installed at eye level
with the cabinet front fitted flush.
a The programme has ended when
no indicators on the controls light
up.
a The programme has ended when
the spot of light is no longer visible
on the floor.
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 33
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.

Interrupting programme

Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Open the appliance door carefully.
1.
Press
⁠ .
2.
a The programme is saved and the
appliance switches off.
Press
to resume the pro-
3.
gramme.
Close the appliance door.
4.

Terminate programme

To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Open the appliance door.
1.
Press
2.
4 seconds.
Close the appliance door.
3.
a All displays light up.
a As soon as the displays are off,
the residual water is pumped out.
a The programme is cancelled and
ends after approx. 1 minute.

Switching off appliance

Please note the information on
1.
"Safe use" → Page 10.
Press
.
2.
Tip: If you press
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
Basic operation en
for approx.
during the wash
33

Advertisement

Table of Contents
loading

Table of Contents