Table of Contents
Advertisement
The button lock is activated and
a
will be automatically deactivated at
the end of the programme.
When the appliance is operated,
a
flashes on the display.
The button lock remains activated
a
with a power failure.
14.7 Deactivate button lock
Press
for approx. 3 seconds.
▶
14.8 Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press
.
1.
The programme is saved and the
a
appliance switches off.
Press
to resume the pro-
2.
gramme.
14.9 Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Press
▶
4 seconds.
All displays light up.
a
As soon as the displays are off,
a
the display shows "0h:01m" and
the residual water is pumped out.
The programme is cancelled and
a
ends after approx. 1 minute.
14.10 Switching off appliance
Please note the information on
1.
Safe use → Page 10.
Press
.
2.
for approx.
Tip: If you press
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
operation en
during the wash
35
Advertisement
Table of Contents
