Removing Tableware; Basic Operation; Switching On The Appliance; Setting A Programme - Siemens SR61HX08KE Information For Use

Table of Contents

Advertisement

en Basic operation

Removing tableware

WARNING
Risk of injury!
Hot tableware can cause burns to the
skin. When hot, tableware is sensitive
to shock, may crack and can result in
injury.
When the programme has ended,
do not empty the appliance until
the tableware has cooled down for
a while.
To prevent water dripping on the
1.
tableware, unload it starting at the
bottom and working up.
Check the washing tank and ac-
2.
cessories for soiling and clean if
necessary.
→ "Cleaning and servicing",
Page 38

Basic operation

Basic operation
Basic operation

Switching on the appliance

Press
⁠ .
The Eco 50° programme is set by
default.
The Eco 50° programme is espe-
cially environmentally friendly and
ideal for normally soiled tableware.
It is the most efficient programme
for the combination of energy/wa-
ter consumption for this type of
tableware and evidences conform-
ity with the EU Ecodesign Direct-
ive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
1
Depending on the appliance specifications
32

Setting a programme

To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
Press the programme button re-
peatedly until the right programme
has been selected.
→ "Programmes", Page 18
a The programme is set and the LED
flashes.

Setting additional functions

You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
→ "Programmes", Page 18
Press the button for the relevant
additional function.
→ "Additional functions", Page 19
a The additional function is set and
the additional function button
flashes.

Setting timer programming

You can delay the start of the pro-
gramme by 3, 6 or 9 hours.
Press
repeatedly until the relev-
1.
ant display lights up.
To activate timer programming,
2.
press
⁠ .
Note: To deactivate timer program-
ming, press
repeatedly until none
of the displays 3h, 6h or 9h light up.

Starting the programme

Press
.
1

Advertisement

Table of Contents
loading

Table of Contents