Huawei AP4030DN Hardware Installation And Maintenance Manual page 26

Huawei AP4030DN
Hardware Installation and Maintenance Guide
Troubleshooting Procedure
Power Supply Mode
Power supply using a power module
PoE power supply
Issue 02 (2015-05-18) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Troubleshooting Procedure
1. Check that the power switch is on.
2. Check that the power cable is securely
connected to the device.
3. Check whether the power supply is
normal.
Replace the power adapter with a normal
one. If the device is powered on, the
original power adapter is faulty. Contact
Huawei technical support or Huawei
agent and ask them to replace the power
adapter.
4. If the device still cannot be powered on,
the device itself is faulty. Contact
Huawei technical support or Huawei
agent and ask them to replace the device.
1. Check whether the power sourcing
equipment supports PoE or is faulty.
2. Check whether the configuration on the
power sourcing equipment causes PoE
power supply errors, such as the PoE
function is disabled or the power-off
time range is incorrectly set.
3. Check whether the network cable or
distribution frame is faulty.
4. If the device still cannot be powered on,
the device itself is faulty. Contact
Huawei technical support engineers or
Huawei agent and ask them to replace
the device.
4 Hardware Failures
22