Whittier Wood McKenzie 1123AUFb Assembly Instructions Manual

Whittier Wood McKenzie 1123AUFb Assembly Instructions Manual

Office chest

Advertisement

Quick Links

Model #
1123AUFb
McKenzie
Office Chest
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions and Finishing Hints before you begin your
project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA

IMPORTANT NOTES:

For normal household use only. Not recommended for commercial use.
Do not climb, sit or stand on this piece of furniture.
Do not overload the drawers.
Unload items before you move this unit.
Before you load or move this unit, tighten all screws and supports.
Before you begin your project, completely read the Assembly
Instructions and Finishing Hints.
Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
This assembly requires two people.
Serious or fatal crushing injuries can occur from furniture tip-over. Use of
tip-over restraints may only reduce but not eliminate the risk of tip-over.
To help prevent tip-over:
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate, do not set TVs or other
heavy objects on top of this product.
Never allow children to climb or hang on drawers, doors or shelves.
Never open more than one drawer at a time.
Warning: At least one tipping restraint kit was included with your piece of
Whittier Wood Furniture. When you receive your furniture, be sure to find
and properly install the tipping restraint(s). If you cannot locate the
restraint(s), please contact us immediately for replacement.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm. California Health and Safety Code
Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your full
name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
Production Code:
VN
WARNING
07/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the McKenzie 1123AUFb and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Whittier Wood McKenzie 1123AUFb

  • Page 1 Never open more than one drawer at a time. Warning: At least one tipping restraint kit was included with your piece of Whittier Wood Furniture. When you receive your furniture, be sure to find and properly install the tipping restraint(s). If you cannot locate the restraint(s), please contact us immediately for replacement.
  • Page 2 1123AUFb McKenzie Office Chest Parts List Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and part name. Part Description Quantity Top Assembly Case Hutch Drawer (inserted) Small Drawer Box (inserted)
  • Page 3 1123AUFb McKenzie Office Chest Parts List Part Description Quantity #6 x 1/2" Undercut Screw (inserted) #8 x 7/8" Lo-Profile Screw (inserted) #8 x 1-1/4" Pan Head Screw (inserted) #8 x 20mm Pan Head Screw (inserted) #6 x 3/4" P. O Zinc Screw (inserted) #6 x 1"...
  • Page 4 1123AUFb McKenzie Office Chest Assembly Instructions Tool Required: Phillips Screwdriver Place the chest at its final destination. Rotate the Small Adjustable Glides (K) on the bottoms of the legs until the unit is level. See Figure 1. Fig. 1 To move the Adjustable Shelf (H), remove the #6 x 1/2" Undercut Screws (ZA) and the Shelf (H).
  • Page 5 1123AUFb McKenzie Office Chest Assembly Instructions Open the Door (I). To adjust the brake tension on the Door Stay (X), turn the screw on the Door Stay (X) clockwise to loosen or counterclockwise to tighten. See Figures 3, 3a and 3b. Fig.
  • Page 6 1123AUFb McKenzie Office Chest Assembly Instructions Tipping restraint: Locate two studs in the wall behind the unit. Attach a Clip (T1) to one wall stud with two #8 x 2" Black Screws (T3). See Figure 4a. Attach a second clip to the unit with two #6 x 5/8"...
  • Page 7 Whittier Finishing Hints instructions call for a slow drying epoxy glue. Carefully Checklist of materials read the label and instructions of the glue manufacturer. □ □ □ Rubber gloves Tack cloth #220 & #320 Your unit may not need glue. □...
  • Page 8 Whittier Finishing Hints Preparing the surface apply additional coats. Lightly sand and wipe surface with a lint-free rag or tack cloth between coats. Sand each piece with #220 grit sandpaper. Sand with the grain of the wood on flat surfaces and opposite the Some finishes tend to slightly raise the grain.

Table of Contents