Changing The Selections After Programme Has Started; Cancelling The Programme; End Of Programme - Beko CM 10121 BB User Manual

6.12 Changing the Selections After
Programme has Started
Adding laundry after the programme has
started:
If the water level in the machine is suitable
when you press Start/Pause button, the
door lock will be deactivated and the door
will open, allowing you to add garments. The
door lock icon on the display goes off when
the door lock is deactivated. After adding
garments, close the door and press Start/
Pause button once again to resume the
washing cycle.
If the water level in the machine is not suit-
able when you press Start/Pause button, the
door lock cannot be deactivated and the
door lock icon on the display remains on.
If the temperature of the water inside
the machine is above 50°C, you
cannot deactivate the door lock for
safety reasons, even if the water
level is suitable.
Switching the machine to pause mode:
Press the Start/Pause button to switch the
machine to pause mode. Pause symbol will
flash on the display.
Changing the programme selection after
programme has started:
The programme change is allowed when the
current programme is running unless the
Child Lock is enabled. This action will cancel
the current programme.
The selected programme starts
anew.
Changing the auxiliary function, speed
and temperature:
Depending on the step the programme has
reached, you can cancel or activate the aux-
iliary functions. See "Auxiliary function selec-
tion"
You can also change the speed and temper-
ature settings. See ''Spin speed selection"
and "Temperature selection".
The loading door will not open if the
water temperature in the machine is
high or the water level is above the
loading door baseline.

6.13 Cancelling the Programme

The programme is cancelled when pro-
gramme selection knob is turned to a differ-
ent programme or machine is turned off and
on again using the programme selection
knob.
If you turn the programme selection
knob when the Child Lock is en-
abled, the programme will not be
cancelled. You should cancel the
Child Lock first.
If you want to open the loading door
after you have cancelled the pro-
gramme but if it is not possible to
open the loading door since the wa-
ter level in the machine is above the
loading door baseline, then turn the
Programme Selection knob to
Pump+Spin programme and drain
the water in the machine.

6.14 End of Programme

End symbol appears on the display when the
programme is completed.
If you do not press any button for 10
minutes, the machine will switch to OFF
mode. Display and all indicators are turned
off.
Completed programme steps will be dis-
played if you press On/Off button.
EN / 31