Table of Contents
Advertisement
Rev 1 Oct.13
Status LED
The LED indicates the device's connection status:
Table 1-2: LED indicator patterns
Colour
LED pattern
a
Blue
Single blink
(every 3 seconds)
a
Amber
Blink (every 3 seconds)
a
Blue
Double blink
(every 3 seconds)
Blue /
Slow blink, alternating blue
Amber
and amber
Amber
Solid
a.
LED pattern displays only if the LED feature is enabled. See below.
You can set the device to not light the LED during regular use (Data connection ready,
Data connection not ready, Data transferring).
To set the status LED behaviour:
1. On the home screen, tap Settings > Display.
2. Tap LED, then select:
· Off — The status LED will not only light up when the device is booting up or a
software update is being downloaded for installation.)
· On — The status LED follows the behaviour described in
LCD touchscreen
The hotspot's touchscreen LCD displays:
•
Wi-Fi name and password
•
Network signal icons (See
•
Data usage details
•
Wi-Fi details (Wi-Fi network management — Main / Guest Wi-Fi and Dual-Band
Wi-Fi, Wi-Fi range, connected devices, etc.)
•
Device settings (screen brightness, software updates, view wireless number, etc.)
•
System alerts
•
Device tutorial
Use the touchscreen to:
•
Personalize the hotspot and change basic settings — Use the homescreen Settings
and Wi-Fi options.
•
Charge another device's battery — Use the Jump Boost feature.
For advanced settings, use a Wi-Fi enabled device to connect to the hotspot and then
visit the homepage at http://m.home.
What the pattern means
Data connection is ready for use
Data connection is not ready (disconnected or no
signal)
Data is transferring (uploading / downloading) on the
data connection
New software is being downloaded for installation
Software is installing on the device
Table 1-3
on page 12 for details.)
Get Started
Table
1-2.
11
Advertisement
Table of Contents
