Dunlop Uni-Vibe UV-1SC Manual

NOTES FOR SETUP
®
UV-1SC Uni-Vibe Stereo Chorus
Congratulations on choosing the Uni-Vibe Stereo Chorus. Like all Dunlop
products, this unique effect is designed to give you quality sound through years
of dependable service.
The Uni-Vibe Stereo Chorus is an analog rotating speaker effect that captures
the legendary tones of the 60's and early 70's.The Dunlop UV-1SC gives you
the rich, full, Mono or Stereo sound worthy of the name Uni-Vibe!
Notice:
This unit is shipped from the factory without a battery to prevent
possible damage from leakage. A 9-volt transistor radio battery must be
installed for operation if an AC adapter is not going to be used.The required
adapter is the Dunlop ECB02, positive tip. To install battery, remove 4 screws
securing the bottom cover and insert the battery.
Dunlop Manufacturing Inc., P.O. Box 846 Benicia, CA 94510 U.S.A.
Tel: (707) 745-2722 FAX: (707) 745-2658
CH09183A