What To Do Before Operation - Daikin FCA50CVMA Operation Manual

Watch your steps at the time of air filter cleaning or
inspection.
Take care of scaffolding and exercise caution when
working high above ground level.

2. WHAT TO DO BEFORE OPERATION

Indoor unit
Outdoor unit
Unit with
remote
controller
NOTE
Cooling only type
This system provides COOLING, PROGRAM DRY, and
FAN OPERATION modes.
Unit without remote
controller
(When used as
simultaneous
operation system)
PRECAUTIONS FOR GROUP CONTROL
SYSTEM OR TWO REMOTE CONTROLLERS
CONTROL SYSTEM
This system provides two other control systems beside
individual control (one remote controller controls one indoor
unit) system. Confrim the following if your unit is the following
control system type.
Group control system
One remote controller controls up to 16 indoor units.
All indoor units are equally set.
Two remote controllers control system
Two remote controllers control one indoor unit (In case
of group control system, one group of indoor units).
NOTE
Contact your local dealer in case of changing the
combination or setting of group control and two remote
controller control systems.
Please do not change the combination and settings for
the group operation and two remote controllers control
systems by yourself, but be sure to ask your local dealer.
e
d
c
b
j
a Air outlet
b
Suction grille
c Air filter (Inside suction grille )
d Drain dicharge device (built-in)
Discharges indoor moisture removed
during the cooling operation.
e
Drain pipe
f
Model name (Model name plate)
g
Horizontal blade (At air outlet)
h
Refrigerant piping
Transmission wiring
i
Earth wiring (Note)
(Note) It is a wiring to let electricity flow from the
indoor unit to the earth for prevention of
eletric shocks or a five in case of emergency.
j
Remote control (Operation part)
The remote controller may not be needed
depending on the system configuration.
f
g
a
h
i
3