Download Print this page

Dell Secure Mobile Access 6200 Getting Started Manual page 52

Advertisement

Safety information for the SMA
7200 appliance
Model
Product
1RK30-0AF
SMA 7200
Safety instructions
The following conditions are required for proper installation:
The Dell SMA appliance is designed to be mounted in a
standard 19-inch rack mount cabinet.
Use the mounting hardware recommended by the rack
manufacturer and ensure that the rack is adequate for
the application.
Ensure that no water or excessive moisture can enter
the unit.
Allow unrestricted airflow around the unit and through
the vents on the side of the unit. A minimum of 1 inch
(25.44mm) clearance is recommended.
Route cables away from power lines, fluorescent
lighting fixtures, and sources of noise such as radios,
transmitters, and broadband amplifiers.
52
Dell Secure Mobile Access 6200/7200 Getting Started Guide
This product is not intended to be installed and used in
a home or public area accessible to the general
population. When installed in schools, this equipment
must be installed in a secure location accessible only by
trained personnel.
The following statement applies only to rack-installed
products that are GS-Marked: This equipment is not
intended for use at workplaces with visual display units,
in accordance with §2 of the German ordinance for
workplaces with visual display units.
Mount in a location away from direct sunlight and
sources of heat. A maximum ambient temperature of
104º F (40º C) is recommended.
If installed in a closed or multi-rack assembly, the
operating ambient temperature of the rack
environment may be greater than the room ambient.
Therefore, consideration should be given to installing
the equipment in an environment compatible with the
maximum recommended ambient temperature.
Mount the Dell SonicWALL appliances evenly in the rack
in order to prevent a hazardous condition caused by
uneven mechanical loading.
Four mounting screws, compatible with the rack design,
must be used and hand-tightened to ensure secure
installation. Choose a mounting location where all four
mounting holes line up with those of the mounting bars
of the 19-inch rack mount cabinet.

Advertisement

loading