Advertisement
About installation and
deployment
This section outlines the process of installing, configuring, and
testing the appliance, and then deploying it in a production
environment.
Table 3
provides an overview of the steps.
Table 3. Installation and deployment process
Installation Step
Description
Make a note of your
You'll need this information when you
appliance serial
register your product on MySonicwall.
number and
The serial number and authentication
authentication code.
code are printed on your appliance
label; they are also displayed on the
General Settings page in AMC.
Rack-mount the
See
appliance and
page
connect the cables.
on page 24.
Turn on the appliance
To connect to your appliance on your
and begin
internal network you must specify an
configuration.
internal IP address, the subnet mask,
and indicate whether your appliance
is part of a cluster. Use the controls
on the front of the appliance. See
Entering network settings using the
LCD
Rack mounting the appliance
37
and
Connecting the appliance
on page 24.
Table 3. Installation and deployment process
Installation Step
Run Setup Wizard.
Register your
appliance on
MySonicwall.
on
Dell Secure Mobile Access 6200/7200 Getting Started Guide
Description
The wizard guides you through the
process of initial setup for your SMA
appliance. See
Running the Setup
Wizard
on page 25.
Register your appliance on
MySonicwall. Product registration
gives you access to essential
resources, such as your license file
and updates. To register, you need
both the serial number for your
appliance and its authentication
code.
21
Advertisement
