Advertisement
3
In the Custom FQDN field, type in the configured
internal or external IP address of the appliance.
This field should match the IP address or hostname of
the appliance as the user would access it.
4
Click Save.
Configuring an access rule
The SMA 6200/7200 appliance uses a granular access policy to
determine what backend resources a given user is allowed to
access.
To configure a default access rule to allow any user
to access resources through the appliance:
1
Navigate to the Security Administration > Access
Control page.
2
Click New.
3
Optionally type in a Description.
4
Click Finish.
Applying the pending changes
To apply all your changes:
1
Click Pending changes at the top right corner of the
page.
2
In the pop-up dialog box, click Apply changes.
Dell Secure Mobile Access 6200/7200 Getting Started Guide
29
Advertisement
