Table of Contents
Advertisement
3.6
Boot menu
The Boot menu items allow you to change the system boot options.
Boot Configuration
CHASSIS INTRUDE
Allows you to enable or disable the chassis intrusion detection function.
Configuration options: [Disabled] [Enabled]
Setup Prompt Timeout
Allows you to set the number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting. Configuration options: [1] - [65535]
Boot up NumLock State
[On]
[Off]
Quiet Boot
Allows you to enable or disable the Quiet Boot option.
Configuration options: [Disabled] [Enabled]
Fast Boot [Enabled]
[Enabled]
[Disabled]
The following four items appear when you set Fast Boot to [Enabled].
SATA Support
[All Devices]
[Last Boot
SATA Devices
Only]
NVMe Support
[Disabled]
[Enabled]
VGA Support
[Auto]
3-14
Set the power-on state of the NumLock to [On].
Set the power-on state of the NumLock to [Off].
Select to accelerate the boot speed.
Select to go back to normal boot.
All devices connected to SATA ports will be available during
POST. This process will extend the POST time.
Only the last boot SATA devices connected to SATA ports will
be detected during POST. Any hardware change will disable
fast boot.
NVMe device will be skipped in fast boot mode.
NVMe device will be enabled in fast boot mode.
Only installing Legacy OpROM with Legacy OS and logo will not
display during POST .
Chapter 3: BIOS setup
Advertisement
Table of Contents
