Table of Contents
Advertisement
The following item appears only when you set Serial Port to [Enabled].
COM2 Control
Allows you to select the COM2 mode. Configuration options: [RS232] [RS422]
[RS485]
Serial Port 3 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Configuration options: [Disabled]
[Enabled]
Serial Port 4 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Configuration options: [Disabled]
[Enabled]
Parallel Port Configuration
Parallel Port
Allows you to enable or disable the Parallel port (LPT/LPTE).Configuration options:
[Disabled] [Enabled]
The following items appear only when you set Parallel Port to [Enabled].
Change Settings [Auto]
This item allows you to select an optimal setting for Super I/O Device. Configuration
options: [Auto] [IO=378h; IRQ=5] [IO=378h; IRQ=5, 6, 7, 9, 10, 11, 12;] [IO=278h;
IRQ=5, 6, 7, 9, 10, 11, 12;] [IO=3BCh; IRQ=5, 6, 7, 9, 10, 11, 12;]
Mode [RS232]
Allows you to select the Parallel Port mode. Configuration options: [STD Printer Mode]
[SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP
and EPP 1.9 Mode] [ECP and EPP 1.7 Mode]
NCT5104DSEC Super IO Configuration
Serial Port 5/6/7/8 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Configuration options: [Disabled]
[Enabled]
3.3.8
Serial Console Configuration
COM1~COM8
Console Redirection
Allows you enable or disable the console redirection feature.
[Enabled] [Disabled]
3-8
Configuration options:
Chapter 3: BIOS setup
Advertisement
Table of Contents
