ASSEMBLY
5
Hardware used: Screw E x8
Attach the emitter
to the upper supports
NOTICE: Assembly step 5 may require a ladder. Follow safety precautions when working on a ladder.
6
Hardware used: Screw E x4
Attach the control box
A NOTICE: From step 6 on, you may continue the assembly without battery, or insert 1 AA battery (not included)
into the control box at any time (see section "Operation-Inserting Battery").
Contact us for assistance: (866) 985-7877 | www.balkenehome.com
to the bottom of the middle plate
8
using 8 screws
.
E
using 4 screws
.
E
8