How To Operate - Promolife ARC O3ARC Operating Manual

O3Arc Operating Manual

How to operate

To power on the ozone generator, press the On/Off power button. This will
illuminate the screen default to Power Adjustment Mode. [see below]
MODE DOWN
Once the Up/Start button has been pressed for three seconds and ozone
has started, you can freely increase or decrease the ozone concentration.
Setting the Timer: If the timer is not used, ozone will fl ow continuously. To set
the timer, fi rst select your ozone output, then press the Mode button. This will
switch to Timer Mode.
MODE DOWN
NOTE: Once the output and timer are set and ozone is fl owing, you can still
change your settings. Push the Mode button to change modes if needed and
make adjustments as usual. Once the Mode button is pushed, ozone fl ow will
stop. When you've made the necessary changes, hold the Up/Set button for
three seconds to lock in your new settings. Ozone fl ow will start again.
Promolife, Inc.
 To increase ozone output, press
the Up/Set button.
 To lower the output, press the
Down button.
 To start ozone production, press
the
seconds. A blue light will illuminate
UP/START
indicating ozone is being produced.
 To increase time, press the Up/Set
button.
 To lower the time, press the Down
button.
 To start ozone production, press
the
seconds. A blue light will illuminate
UP/START
indicating ozone is being produced
and the timer will start.
888-742-3404

Up/Start button
Up/Start button
www.promolife.com

7
for three
for three