Vista VIPER HDA 8 User Manual
  1. Manuals
  2. Brands
  3. Vista Manuals
  4. Power Supply
  5. Viper HDA 8
  6. User manual

Vista VIPER HDA 8 User Manual

Hide thumbs Also See for VIPER HDA 8:
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
HDA 8 and 16 channel
DVR 1U
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Vista VIPER HDA 8

Summary of Contents for Vista VIPER HDA 8

  • Page 1 All manuals and user guides at all-guides.com HDA 8 and 16 channel DVR 1U User Manual...
  • Page 2 All manuals and user guides at all-guides.com Please read this manual thoroughly before use and keep it handy for future reference.
  • Page 3 All manuals and user guides at all-guides.com Before You Begin Read these instructions before installing or operating this product. Note: This installation should be made by a qualified service person and should conform to local codes. This manual provides installation and operation information. To use this document, you must have the following minimum qualifications: ...
  • Page 4 All manuals and user guides at all-guides.com IMPORTANT SAFEGUARDS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.

  • Page 5: Table Of Contents

    All manuals and user guides at all-guides.com Table of Contents Before You Begin Intended use Customer Support WARNINGS AND CAUTIONS: Table of Contents ..........................1 Overview Package Contents ........................3 DVR Description ......................... 3 Installation Connection of exterior devices ..................... 6 DVR power up ...........................
  • Page 6 All manuals and user guides at all-guides.com General buttons in Setup menu ....................25 SYSTEM ..........................26 4.2.1 System ........................26 4.2.2 Time/Date ........................28 4.2.3 Account > User ......................31 4.2.4 Configuration (Config) ....................33 CAMERA ..........................35 4.3.1 Basic ..........................

  • Page 7: Warnings And Cautions

    All manuals and user guides at all-guides.com Overview Package Contents The device package contents consist of the following: Note Please check all components involved. Table 1-1 Package contents Name Name Software CD DC Power Adapter & Power cord Quick guide Mouse Remote controller DVR Description...
  • Page 8 All manuals and user guides at all-guides.com 8ch DVR 7 8 9 16ch DVR Name Function Audio In Camera audio input port Video In Camera video input port CVBS CVBS output port (depending on device types) VGA output port HD Output HD output port Network connector Network...

  • Page 9: Installation

    All manuals and user guides at all-guides.com Installation Connect external devices as per the diagram below Figure 2-1 Connection map VIPER-HAD manual V1.0...

  • Page 10: Connection Of Exterior Devices

    All manuals and user guides at all-guides.com Connection of exterior devices How to connect each port to rear section of the unit: 1 Place the unit on a stable flat surface. 2 Ensure there is enough space around the device to ensure adequate ventilation, and avoiding any damage to connection leads 3 Ensure unit is unplugged before connecting external devices Make sure to withdraw the mains plug before installing the device.
  • Page 11 All manuals and user guides at all-guides.com 9 Connect a mouse to the USB port 10 Finally connect the power VIPER-HAD manual V1.0...

  • Page 12: Dvr Power Up

    All manuals and user guides at all-guides.com DVR power up When the DVR is powered up, it will take a couple of minutes to boot, the following icons will be displayed in order as it goes through it’s booting cycle When the boot up process is completed a buzzer will sound and the start up screen will be displayed.

  • Page 13: Quick Set Up

    All manuals and user guides at all-guides.com Quick set up Quick set up can be used to set the basic system settings 2.3.1 Account 1 Click the keyboard icon to set ID and Password for users.  Default ID/Password is admin/admin. Note ...

  • Page 14: System

    All manuals and user guides at all-guides.com 2.3.2 System 1 Set each item in System setting screen. System Mode: can be set to Analogue only (default) or Analogue plus IP cameras (max 25% of  channels) Language: Select system language. ...

  • Page 15: Network

    All manuals and user guides at all-guides.com 2.3.3 Network 1 Set each item in Network setting screen. WAN Port: Select whether to use static IP or dynamic IP.  IP Address, Subnet Mask, Gateway, DNS, and Port: As for dynamic IP, enter information in each ...

  • Page 16: Time/Date

    All manuals and user guides at all-guides.com 2.3.5 Time/Date 1 Set each item in Time/Date setting screen. Network Time Sync: Select network for synchronizing with time server.  System Time: Not for synchronizing with network time server, set the device time; otherwise ...

  • Page 17: Live Screen Configuration

    All manuals and user guides at all-guides.com Live Screen Configuration Figure 3-1 UI Screen Configuration Table 3-1 Items and Description of UI Screen Configuration Item Description Setting menu Setting menu is located on the top edge of the screen. See section “04 Setup ”...

  • Page 18: Icons In Live Screen

    All manuals and user guides at all-guides.com Icons in Live screen Chosen live screen is framed by a blue border; the segment that the mouse is Note located in is framed by a yellow border. Figure 3-2 Live screen icon Table 3-2 Live screen icon and its description Icon Description...

  • Page 19: Live Launcher Menu

    All manuals and user guides at all-guides.com Live Launcher menu This chapter describes Launcher menu located at the bottom of the screen Figure 3-3 Launcher menu Table 3-3 Launcher menu Item and Description Item Description Log in/out status and logged in ID Date &...

  • Page 20: Backup (Down Loading Of Video Footage)

    All manuals and user guides at all-guides.com 3.2.1 Backup (Down loading of video footage) Figure 3-4 Backup Table 3-4 Backup Item and Description Item Description Select CH Select the channels to be downloaded Select All/ Select or clear all channels. Unselect All Start Setting back-up start time (Bookmark: bookmark list).

  • Page 21: Quick Menu

    All manuals and user guides at all-guides.com Quick menu Right click anywhere on the screen to display the Quick menu. Figure 3-5 Quick menu Table 3-5 Quick menu Item and Description Item Description Screen Mode Select the split screen mod to be displayed (Full, 2X2, 3X3, and 4x4). Magnify the selected live full screen image (Zoom out, 2 times, 4 times, and Zoom in 8 times).

  • Page 22: Ptz Control

    All manuals and user guides at all-guides.com 3.3.1 PTZ Control PTZ Control menu can be displayed if relevant channel’s PTZ protocol is set in Note DEVICE > PTZ in the upper live screen. Figure 3-6 Quick menu > PTZ Control Table 3-6 Quick menu >...
  • Page 23 All manuals and user guides at all-guides.com In PTZ Control screen, clicking the right button of the mouse displays Quick menu. Figure 3-7 PTZ Control Quick menu Table 3-7 PTZ Control Item and Description in Quick menu Item Description Preset Go Move to a preset position Preset Save Saving specific positions of the camera, at most 255 settings...

  • Page 24: Status > System Log

    All manuals and user guides at all-guides.com 3.3.2 Status > System log Users can see the system log information in System log tap in Status screen. Figure 3-8 Status > System log in Quick menu Table 3-8 Status of Quick menu > System log Item and Description Item Description Start...

  • Page 25: Status > Event

    All manuals and user guides at all-guides.com 3.3.3 Status > Event The system log information can be seen in the System log tab in Status screen. Figure 3-9 Status > Event in Quick menu Table 3-9 Status > Event Item and Description in Quick menu Item Description Temporary fixing or releasing an event within the list (toggle).

  • Page 26: Status > Record

    All manuals and user guides at all-guides.com 3.3.4 Status > Record The recording status in Record tab in Status screen. Figure 3-10 Status > Record in Quick menu Table 3-10 Status > Record Item and Description in Quick menu Item Description Record time Displays the first and last recorded time...

  • Page 27: Setup Menu

    All manuals and user guides at all-guides.com Setup menu This chapter describes Setup menu located at the top edge of the screen. Figure 4-1 Setup menu Selecting the menu opens the setting screen. Setup screen is also available within the Quick menu. Right click the mouse and Note select Setup.
  • Page 28 All manuals and user guides at all-guides.com Setup menu includes: Table 4-2 Setup menu tree Level 1 Level 2 Level 3 System System F/W Upgrade Time/Date Time/Date Holiday SYSTEM Account User Export/Import Configuration Factory Default Basic Basic Audio In CAMERA Advanced Advanced Display...

  • Page 29: General Buttons In Setup Menu

    All manuals and user guides at all-guides.com Level 1 Level 2 Level 3 Basic WAN Port DVRNS/Dashboard NETWORK DVRNS/DDNS DDNS E-Mail E-Mail General buttons in Setup menu This section depicts General buttons in Setup menu. Figure 4-3 General buttons in Setup menu Table 4-3 Item and Description of General buttons in Setup menu Item Description...

  • Page 30: System

    All manuals and user guides at all-guides.com SYSTEM 4.2.1 System Set and upgrade the basic items of the system. System > System Set the basic items in the System. Figure 4-4 SYSTEM > System > System Table 4-4 SYSTEM > System > System Item and Description Name Function Language...
  • Page 31 All manuals and user guides at all-guides.com System > F/W Upgrade Use to apply new firmware to the DVR Figure 4-5 SYSTEM > System > F/W Upgrade Table 4-5 SYSTEM > System > F/W Upgrade Item and Description Name Function Current Version Displaying the present tool version.

  • Page 32: Time/Date

    All manuals and user guides at all-guides.com 4.2.2 Time/Date Set the date, time, and holidays on the system. Time/Date > Time/Date Set the date, time, and holidays of the system. Figure 4-6 SYSTEM > Time/Date > Time/Date Table 4-6 SYSTEM > Time/Date > Time/Date Item and Description Name Function System Time...
  • Page 33 All manuals and user guides at all-guides.com Time/Date > Holiday Set holidays dates on the system. Figure 4-7 SYSTEM > Time/Date > Holiday Table 4-7 SYSTEM > Time/Date > Holiday Item and Description Name Function Year Select years to set holidays within. Delete selected holidays.
  • Page 34 All manuals and user guides at all-guides.com Clicking Add Holiday displays holiday addition screen like below. Figure 4-8 SYSTEM > Time/Date > Holiday > Add Holiday Table 4-8 SYSTEM > Time/Date > Holiday > Add Holiday Item and Description Name Function Name Enter the holiday name.

  • Page 35: Account > User

    All manuals and user guides at all-guides.com 4.2.3 Account > User Set the user’s account of the system. Figure 4-9 SYSTEM > Account > User Table 4-9 SYSTEM > Account > User Item and Description Name Function Add Group Adds extra User groups ( each can have it’s own user levels) Add User Add users to a selected group.
  • Page 36 All manuals and user guides at all-guides.com Press Add Group button, then Add Group screen displays. Figure 4-10 SYSTEM > Account > User > Add Group Table 4-10 SYSTEM > Account > User > Add Group Item and Description Name Function Name Enter the group name.

  • Page 37: Configuration (Config)

    All manuals and user guides at all-guides.com 4.2.4 Configuration (Config) Config > Export/Import The system settings can be Exported to or Imported from a USB pen Figure 4-12 SYSTEM > Config > Export/Import Table 4-12 SYSTEM > Config > Export/Import Item and Description Name Function Device...
  • Page 38 All manuals and user guides at all-guides.com Config > Factory Default Reset the device setting to factory default settings. Figure 4-13 SYSTEM > Config > Factory Default Table 4-13 SYSTEM > Config > Factory Default Item and Description Name Function Select All Select/deselect all items to be defaulted /Unselect All...

  • Page 39: Camera

    All manuals and user guides at all-guides.com CAMERA Setup the camera configuration of each individual camera 4.3.1 Basic Basic > Basic Figure 4-14 CAMERA > Basic > Basic Table 4-14 CAMERA > Basic > Basic Item and Description Name Function Shows the channel number Title Edit the camera name.
  • Page 40 All manuals and user guides at all-guides.com Press Copy Covert Setup button, then Copy Covert Setup screen displays. Figure 4-15 CAMERA > Basic > Basic > Copy Covert Setup Table 4-15 CAMERA > Basic > Basic > Copy Covert Setup Item and Description Name Function From...
  • Page 41 All manuals and user guides at all-guides.com Basic > Audio In Figure 4-16 CAMERA >Basic > Audio In Table 4-16 CAMERA > Basic > Audio In Item and Description Name Function Display channel number Select/deselect whether to use audio. Assign Select channels to be assigned audio.

  • Page 42: Advanced ( Video And Privacy Masks)

    All manuals and user guides at all-guides.com 4.3.2 Advanced ( Video and Privacy masks) Figure 4-17 CAMERA > Advanced Table 4-17 CAMERA > Advanced Item and Description Name Function Display channel number Video Set brightness, contrast, and colour settings of the camera. Privacy Mask Set the privacy masks;...
  • Page 43 All manuals and user guides at all-guides.com Setting privacy masks: Figure 4-18 CAMERA > Advanced > Privacy Mask Table 4-18 CAMERA > Advanced > Privacy Mask Item and Description Name Function Select channels to set privacy field. Privacy Mask Click enable to allow privacy masks on the selected channel New Mask Click new mask then click and drag to create mask.

  • Page 44: Device

    All manuals and user guides at all-guides.com DEVICE This section allows the configuring of non camera external devices and HDD formatting. 4.4.1 Display Display > Display Set the parameters relating to the display Figure 4-19 DEVICE > Display > Display Table 4-19 DEVICE >...
  • Page 45 All manuals and user guides at all-guides.com Display > OSD Set the On Screen Display settings Figure 4-20 DEVICE > Display > OSD Table 4-20 DEVICE > Display > OSD Item and Description Name Function Camera Name Select what is displayed in the camera titles (Off, CH+Title, CH). Live Bar Select the way to display the live bar (Always On, Auto Hide).
  • Page 46 All manuals and user guides at all-guides.com Display > Sequence Figure 4-21 DEVICE > Display > Sequence Table 4-21 DEVICE > Display > Sequence Item and Description Name Function Quad Sequence Click the “use” box to allow sequence of quad 4 way displays Division Select screen partition mode to be marked in the below table (All, Full, and Quad).
  • Page 47 All manuals and user guides at all-guides.com Clicking Add Sequence displays Add Sequence screen. Figure 4-22 DEVICE > Display > Sequence > Add Sequence Table 4-22 DEVICE > Display > Sequence > Add Sequence Item and Description Name Function Dwell Time Select time to play (3 sec, 5 sec, 10 sec, 15 sec, and 30 sec).

  • Page 48: Disk

    All manuals and user guides at all-guides.com 4.4.2 Disk Device > Disk>setup Figure 4-23 DEVICE > Disk > Setup Table 4-23 DEVICE > Disk > Setup Item and Description Name Function Refresh disk information. Disk Info Display the basic disk information in disc list. ...
  • Page 49 All manuals and user guides at all-guides.com Device>Disk > iSCSI . Figure 4-24 DEVICE > Disk > iSCSI Table 4-24 DEVICE > Disk > iSCSI Item and Description Name Function Register Opens iSCSI registration window. Delete Delete registered iSCSI storage. Detail Display selected iSCSI IP address and port number.
  • Page 50 All manuals and user guides at all-guides.com Name Function Target Address Input IP address and port for iSCSI Target Port HTTP Port Discover Click to search iSCSI storage. Click to register the discovered iSCSI storage. VIPER-HAD manual V1.0...

  • Page 51: Ptz > Ptz

    All manuals and user guides at all-guides.com 4.4.3 PTZ > PTZ To use PTZ Function of the device, users need to match ID, protocol, and speed with each camera. Figure 4-25 DEVICE > PTZ > PTZ Table 4-25 DEVICE > PTZ > PTZ Item and Description Name Function Copy PTZ Setup...

  • Page 52: Serial Device > Serial Device

    All manuals and user guides at all-guides.com 4.4.4 Serial Device > Serial Device Used to connect RS485 PTZ camera and USB devices to the DVR. Figure 4-26 DEVICE > Serial Device > Serial Device Table 4-26 DEVICE > Serial Device > Serial Device Item and Description Name Function USB (to Serial)

  • Page 53: Text > Text

    All manuals and user guides at all-guides.com 4.4.5 TEXT > TEXT Used to configure PoS and Text devices to the DVR (Example - AVE VSI-PRO Max till interface) Figure 4-27 DEVICE > TEXT > TEXT Table 4-27 DEVICE > TEXT > TEXT Item and Description Name Function Select/deselect whether to use text function.
  • Page 54 All manuals and user guides at all-guides.com Press Copy to TEXT Setup button, then Copy to TEXT Setup screen displays. Figure 4-28 DEVICE > TEXT > TEXT > Copy to TEXT Setup Table 4-28 ICE > TEXT > TEXT > Copy to TEXT Setup Item and Description Name Function From...

  • Page 55: Record

    All manuals and user guides at all-guides.com RECORD 4.5.1 Schedule > Schedule Each hour within each day can be allocated a different recording type Figure 4-29 RECORD > Schedule > Schedule Table 4-29 RECORD > Schedule > Schedule Item and Description Name Function Select channels to set schedules.
  • Page 56 All manuals and user guides at all-guides.com The function of each scheduling type involves: Table 4-30 Function of each scheduling type Color Scheduling type Function None Do not record. Continuous Record on consecutive mode when time set. Motion Record on event recording mode when motion events occur. Alarm Record on event recording mode when alarm occurs.
  • Page 57 All manuals and user guides at all-guides.com 7 Copy Schedule Setup screen displays. 8 Select channels to be copied. 9 Select channels to apply copied content. 10 Copy the schedule by pressing Apply. 11 Press Save to save the schedule. VIPER-HAD manual V1.0...

  • Page 58: Stream

    All manuals and user guides at all-guides.com 4.5.2 Stream Used to set the image resolution when event occurs across channels or general recording is in process. Stream > Main Stream To set the image quality and resolution of Main Stream Figure 4-30 RECORD >...
  • Page 59 All manuals and user guides at all-guides.com Clicking Copy Stream Setup opens Copy Stream Setup. Figure 4-31 RECORD > Stream > Main Stream > Copy Stream Setup Table 4-32 RECORD > Stream > Main Stream > Copy Stream Setup Item and Description Name Function From...
  • Page 60 All manuals and user guides at all-guides.com Stream > Second Stream To set the image quality and resolution of Second Stream, used when the live or playback screen is selected. Figure 4-32 RECORD > Stream > Second Stream Table 4-33 RECORD > Stream > Second Stream Item and Description Name Function Display channels.
  • Page 61 All manuals and user guides at all-guides.com Stream > Panic Sets the recording parameters for the Panic Record mode Figure 4-33 RECORD > Stream > Panic Table 4-34 RECORD > Stream > Panic Item and Description Name Function Panic Record Select/deselect to use immediate recording function.

  • Page 62: Event

    All manuals and user guides at all-guides.com EVENT 4.6.1 System/Disk System/Disk > System Used to set up general system events and the actions that occur. Figure 4-34 Event > System/Disk > System Table 4-35 Event > System/Disk > System Item and Description Name Function System Restart...
  • Page 63 All manuals and user guides at all-guides.com System/Disk > Disk To set disk event Figure 4-35 Event > System/Disk > Disk Table 4-36 Event > System/Disk > Disk Item and Description Name Function Disk Unplugged Select/deselect whether to use disk unplugged event Beep Select/deselect whether to use buzzer sound in case of event.

  • Page 64: Alarm In

    All manuals and user guides at all-guides.com 4.6.2 Alarm In Alarm In > Setup To set actions required on a hard wired alarm input. Figure 4-36 Event > Alarm In > Setup Table 4-37 Event > Alarm In > Setup Item and Description Name Function Sensor...
  • Page 65 All manuals and user guides at all-guides.com Placing your mouse on Alarm, Group Rec, Noti. Or Preset and clicking editing Icon( ) in right corner displays Event : Alarm screen. Figure 4-37 Event > Alarm In > Setup > Event : Alarm Table 4-38 Event >...
  • Page 66 All manuals and user guides at all-guides.com Alarm In > Schedule To schedule the times during each day when the alarm inputs are active. Figure 4-38 Event > Alarm In > Schedule Table 4-39 Event > Alarm In > Schedule Item and Description Name Function Sensor...

  • Page 67: Motion

    All manuals and user guides at all-guides.com 4.6.3 Motion Motion > Setup Figure 4-39 Event > Motion > Setup Table 4-40 Event > Motion > Setup Item and Description Name Function Display channels. Select/deselect whether to use motion function in the channel. Area Display the motion area.
  • Page 68 All manuals and user guides at all-guides.com Motion > Schedule To schedule the record times when the motion detection is active on each channel. Figure 4-40 Event > Motion > Schedule Table 4-41 Event > Motion > Schedule Item and Description Name Function Select channels to set schedules.

  • Page 69: Video Loss > Setup

    All manuals and user guides at all-guides.com 4.6.4 Video Loss > Setup Figure 4-41 Event > Video Loss > Setup Table 4-42 Event > Video Loss > Setup Item and Description Name Function Display channels. Select/deselect whether to use Video Loss in the channel. Select use time of buzzer sound (null, 5 sec, 10 sec, 20 sec, 30 sec, 1 Beep min, 10 min, 30 min, and 1 hour).

  • Page 70: Notification

    All manuals and user guides at all-guides.com 4.6.5 Notification To set and schedule periodical alarms Notification > Periodic Figure 4-42 EVENT > Notification > Periodic Table 4-43 EVENT > Notification > Periodic Item and Description Name Function Periodic Select/deselect whether to use periodical alarms Notification Summary Send the save or event information.
  • Page 71 All manuals and user guides at all-guides.com Notification > Schedule To schedule periodical alarms Figure 4-43 EVENT > Notification > Schedule Table 4-44 EVENT > Notification > Schedule Item and Description Name Function Schedule Type Select the types of schedules. Selection Schedule Table Displays each day of the week in hourly segments...

  • Page 72: Network

    All manuals and user guides at all-guides.com NETWORK 4.7.1 Basic > WAN Port Figure 4-44 NETWORK > Basic > WAN Port Table 4-45 NETWORK > Basic > WAN Port Item and Description Name Function Static IP Check if you use static IP. For using static IP, enter IP address, Subnet Mask, and Gateway.

  • Page 73: Dvrns/Ddns

    All manuals and user guides at all-guides.com 4.7.2 DVRNS/DDNS DVRNS/DDNS > DVRNS/Dashboard This allows the user to register all their VIPER devices on a remote server under a unique account. They can then login into the server to view: Live images; Set up the devices and view the status of each device.
  • Page 74 All manuals and user guides at all-guides.com DVRNS/DDNS > DDNS To set DDNS site for remote users to access in networking Figure 4-46 NETWORK > DVRNS/DDNS > DDNS Table 4-47 NETWORK > DVRNS/DDNS > DDNS Item and Description Name Function DDNS Site Select DDNS site Host Name...

  • Page 75: E-Mail

    All manuals and user guides at all-guides.com 4.7.3 E-Mail To set email server to send email when an event occurs. Figure 4-47 NETWORK > E-Mail > E-Mail Table 4-48 NETWORK > E-Mail > E-Mail Item and Description Name Function Server Type Select SMTP server.

  • Page 76: Search/Playback

    All manuals and user guides at all-guides.com Search/Playback This chapter describes Live Launcher search and play menu located at the bottom of the screen. Figure 5-1 Live Launcher Search, Play menu Table 5-1 Item and Description of Live Launcher Search, Play menu Item Description Searching recording data (time, event, and thumbnail).
  • Page 77 All manuals and user guides at all-guides.com Figure 5-3 Search: Event Table 5-3 Search: Event Item and Description Item Description Select CH Select channels to be searched Select All Select/deselect all channels. /Unselect All Start Set the start time Set the end time EVENT TYPE Selecting the types of event (immediate recording, motion, Alarm-In, Video Loss, and bookmark).
  • Page 78 All manuals and user guides at all-guides.com Figure 5-4 Search: Thumbnail Table 5-4 Search: Thumbnail Item and Description Item Description Calendar Select dates to search Select channels to search Time Select time to begin search Interval Setting time interval between images to be displayed Time This plays each displayed segment forward in time lapse mode Lapse/Pause...
  • Page 79 All manuals and user guides at all-guides.com Figure 5-5 Search: Text Table 5-5 Search: Text Item and Description Item Description Select CH Select channels to search Select All Select/deselect all channels. /Unselect All Start Set the start time to search Set the end time to search Keyword Entering keyword to search...

  • Page 80: Playback

    All manuals and user guides at all-guides.com Playback To play recorded data Figure 5-6 Playback Launcher Table 5-6 Playback Launcher Item and Description Item Description Play forward Date and Time Displaying date and time of video being played Moving to the first section of the video Playing the videos with multiplied speed in reverse (2~64x).

  • Page 81: Webviewer

    All manuals and user guides at all-guides.com Webviewer This chapter describes webviewer for monitoring videos through a PC in remote mode. Table 6-7 System Requirement for Webviewer Item Recommended Minimum MicrosoftⓇ WindowsⓇ 10 x86(64bit) MicrosoftⓇ WindowsⓇ XP Home SP3 (Home Premium, Professional, Ultimate) MicrosoftⓇ...
  • Page 82 All manuals and user guides at all-guides.com When Java download screen opens, download and install JAVA. Live images may now be monitored. In case of selecting Setup Users can set the menu in similar ways with DVR connected monitor. Figure 6-1 Setup screen VIPER-HAD manual V1.0...
  • Page 83 All manuals and user guides at all-guides.com Products Specifications Channel 16CH VIDEO Video Input Channel Up to 8ch (8 BNC, 2 IP configurable) Up to 16ch (16 BNC, 4 IP configurable) Video Input Type AHD, TVI, CVBS, IP AHD, TVI, CVBS, IP Video 1080p, 720p, 960H, D1(CVBS) 1080p, 720p, 960H, D1(CVBS)
  • Page 84 All manuals and user guides at all-guides.com Backup File Format AVI, H4V, MP4 AVI, H4V, MP4 FUNCTION PTZ & OSD Control RS485, UTC RS485, UTC Text In POS/ATM(Network, RS485, USB) POS/ATM(Network, RS485, USB) User Interface Mouse, USB/RS485 Keyboard Mouse, USB/RS485 Keyboard NETWORK Ethernet 1 RJ45 10/100/1000 Base-T...
  • Page 85 All manuals and user guides at all-guides.com Norbain SD 210 Wharfedale Road Winnersh Triangle Wokingham England RG41 5TP 01189 125 000 Version 1.0 VIPER-HAD manual V1.0...

This manual is also suitable for:

Viper hda 16

Table of Contents