Changing Basic Settings - Siemens SX75ZX05CE User Manual

Basic setting
SideLight
Tone volume
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Open the appliance door.
1.
Press ⁠ .
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows Hxx.
a The display shows
Display text Selection
1
I01 I00 - I01
1
b02 b00 - b03
1
Cn0 Cn0 - Cn1
1
rc1 rc0 - rc2
rE Start with
YES
Confirm with
⁠ .
Description
While the programme is running, a
strip of light appears on the left-hand
side of the appliance. If the appli-
ance door is not completely closed,
the strip of light will flash. The pro-
gramme has ended when the strip of
light is no longer visible on the left-
hand side.
Switch SideLight on "I01" or off
"I00".
Adjustment of tone volume.
Level "b00" switches the signal tone
off.
Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
Activate or deactivate
→ "Remote Start ", Page 37.
The following settings are possible:
¡ With the setting "rc0", the func-
tion is permanently deactivated.
¡ With the setting "rc1", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 37
¡ With the setting "rc2", the func-
tion is permanently activated.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
Press
4.
the display shows the required set-
ting.
Press repeatedly until the dis-
5.
play shows the right value.
You can change several settings.
To save the settings, press
6.
for 3 seconds.
Close the appliance door.
7.
Basic settings en
repeatedly until
35