Advertisement
Quick Links
PF -1100A/1200A series
Bedside Cabinet
Thank you for purchasing the bedside cabinet.
This instruction manual describes precautions how to safely use and operate the bedside cabinet.
Before using this bedside cabinet, read this instruction manual to fully understand the safe and proper
operating procedures.
The correct operating procedures should be explained not only to the persons using the bed but also to
caregivers.
After reading this instruction manual, keep it where it can be easily accessed for later reference.
The actual product purchased may differ from detailed descriptions given in this instruction manual due to
product improvements.
For any queries, please feel free to directly contact your dealer.
Intended use
This bedside cabinet is designed to be used as a storage furniture at the bedside.
Part names and part confirmations
After unpacking, check that there are no damaged parts. If any parts are damaged, contact your dealer.
<PF-1100A/1101A>
Cabinet top
Towel rail
Sub-table
Drawer
Door attachment hole
Safety lock
(PF-1101A/1201A only)
Shelf board
Door
Shelf
(PF-1100A/1101A only)
Caster
7A10744400A1
<PF-1200A/1201A>
Advertisement
Related Manuals for PARAMOUNT BED PF-1100A Series
Summary of Contents for PARAMOUNT BED PF-1100A Series
- Page 1 PF -1100A/1200A series Bedside Cabinet 7A10744400A1 Thank you for purchasing the bedside cabinet. This instruction manual describes precautions how to safely use and operate the bedside cabinet. Before using this bedside cabinet, read this instruction manual to fully understand the safe and proper operating procedures.
- Page 2 Safety precautions ■ Do not directly place a heated pot, water boiler (60℃ or higher) or other such device on the cabinet top, sub-table or shelf board. ●The cabinet may be deformed and discolored. ■ Do not apply more than 30kg on the bedside cabinet. ●Load capacity is 30kg.
- Page 3 Detaching and attaching the door ■The door can be changed the right-hand for the left-hand if necessary. <Detaching the door> <Attaching the door> ①Pull out the upper pin from the door attachment ①Insert the upper pin into the door attachment hole. ②Push down the lower pin into the door attachment hole about 1cm with flathead screwdriver.
- Page 4 Specifications Subject to normal manufacturing tolerance Product Name Bedside Cabinet Model No. PF-1100A PF-1101A PF-1200A PF-1201A Body and door Made of steel, powder coating (part is resin mold items) Cabinet top, drawer, Material Made of resin sub-table, shelf board Towel rail Made of steel, chrome plating Dimensions (mm) 454 x 469 x 930...