Saddle And Seatpost Assembly - Delta rDrive User Manual

SADDLE AND SEATPOST ASSEMBLY

The Saddle comes assembled onto
the seat post which needs assembling
onto the bike. Getting the correct
saddle height for you will allow a
comfortable riding position and easy
mounting and dismounting of the bike.
1. Remove the carboard packaging
from the seatpost/saddle and
note the location of the minimum
insertion mark.
2. Apply a small coating of grease to
the seatpost before inserting it into
the top of the seattube
3. Slide the seatpost into the top of
the seatube with the saddle facing
forward – the narrow point of the
saddle should point towards the
handlebars.
4. Adjust the height of the saddle
making sure the minimum insertion
mark on the back of the seatpost is
not visible.
5. Tighten the seatpost clamp to 5-8
Nm.
When the saddle height is adjusted, you must be able to reach the ground with your
feet to ensure that you have full control over the e-bike when standing still. Remember
to re-tighten the seatpost clamp bolt that fixes the seatpost position when you are
done adjusting the saddle height.
Page 14
SADDLE
MICRO ADJUST
SEATPOST
MINIMUM MARK
SEATPOST CLAMP
BOLT
SEAT TUBE