Table of Contents
Advertisement
GETTING STARTED
Assembly of this e-bike is recommended by a certified bicycle mechanic.
If you choose to assemble your e-bike it is recommended that your bicycle be
inspected by a certified bicycle mechanic prior to riding.
It's important to follow this assembly guide. E-bikes are great fun but improper
assembly can result in serious injury and/or death.
The tools you will need to assemble this bike are as follows:
•
4mm Hex Key (included)
•
5mm Hex Key (included)
•
6mm Hex Key (included)
•
Multi-wrench (included)
•
15mm open-ended wrench and/or a dedicated 15mm pedal wrench
(Recommend)
•
Snips or cable cutters (not included)
•
Torque wrench (not included)
•
Pump to inflate the tires (not included)
•
Grease for the pedal axle threads, stem and seatpost (not incuded)
We recommend using a torque wrench to check all the nuts and bolts that require
assembly to meet the required torque settings.
Once the e-bike has been unpacked, make sure you have removed all the packaging
and dispose of it appropriately – much of the packaging materials can be recycled.
Before disposing of the carton check that there are no remaining parts in the box.
When cutting zip-ties we recommend using snips or cable cutters to cut. Be very
careful not to cut any cables or wires.
We recommend using a bicycle assembly stand to help secure the bike during
assembly.
Check the latest assembly information here.
Page 6
Advertisement
Table of Contents
