Getting Started On The Electrical System - Delta mDrive User Manual

GETTING STARTED ON THE ELECTRICAL SYSTEM

The e-bike features a simple-to-use Promovec e-bike system that feels like a regular
bike but offers seamless electrical assistance. Please familiarize yourself with the
operation of the system before your first ride.
CHARGE THE BATTERY
Before riding your e-bike, you need to charge the battery. We recommend charging
the battery for a full 24 hours before using it for the first time.
Carefully unpack the battery and familiarize yourself with both the battery and the
charger overview in this user manual. Additional information can be found in the
charger manual.
The battery can be charged either on or off the bike. Refer to the Installing and
removing the battery guide on how to attach it to the bike.
Once the battery is charged and locked into the e-bike you are ready to go!
RELEASE THE POWER
Start by pressing and holding the On/Off button for 3 seconds and the display will
wake up. To switch the system off press and hold the on/off button for 3 seconds.
OK, LETS GO!
When you start pedalling, the motor will start assisting according to the assist-level
chosen from 1 to 5. It is recommended for your first ride you start in assist-level 1.
The Promovec centre motor works as follows:
• A built-in speed sensor measures pedal movement and the control unit starts
the motor
• The engine power is regulated according to the assist level.
The control unit automatically switches off the center motor when:
• No pedal movement is registered.
• The speed exceeds 15.5 mp/h.
Page 16