Subscribe to Our Youtube Channel
Related Manuals for Wolfgang Puck BPCRM800
Summary of Contents for Wolfgang Puck BPCRM800
-
Page 4: Know Your Electric Pressure Cooker
Know Your Electric Pressure Cooker Pressure Cooker Housing Indicator Lights Timer Dial (adjustable in 3 minute increments) Control Panel Pressure Release Device Removable Cooking Pot (Steam Vent) Pressure Cooker Lid Handle Water Collector Rice Measuring Cup Rice Scoop Red Float Valve (Pressure Indicator) Detachable Power Cord Steaming Rack... - Page 6 The pressure can be released manually or on its own. If a recipe states "let pressure drop on its own" pin down unplug the cooker and let sit until the red pressure phototo indicator pin has dropped ( see fig 5 ) AND the lid cooking rice, never load cooker above the turns without any resistance.
-
Page 8: Care And Cleaning
Care & Cleaning Allow pressure cooker to cool completely before cleaning. Unplug the Figure 1 power cord from the outlet and then from the pressure cooker. Press downward Gasket The pressure cooker housing can be washed with a warm damp cloth, do not use abrasive cleaners or cleaning pads, or immerse the pressure cooker housing or power cord in water or any other liquid.
Need help?
Do you have a question about the BPCRM800 and is the answer not in the manual?
Questions and answers
I need a replacement lid
To find a replacement lid for the Wolfgang Puck BPCRM800 pressure cooker, search online marketplaces that sell pressure cooker parts, such as eBay or Amazon. Use keywords like "Wolfgang Puck BPCRM800 replacement lid" or "Wolfgang Puck pressure cooker lid" for better results. Check product descriptions to ensure compatibility with the BPCRM800 model.
This answer is automatically generated
I have a Wolfgang Puck model bpcrm800. When I set the timer to cook it just goes to warm within 1 minute
The Wolfgang Puck BPCRM800 pressure cooker may go to WARM mode within 1 minute when the timer is set to cook if the cooking pot is not properly sealed, the pressure is not building up correctly, or there is an issue with the gasket or lid placement. If the pressure indicator pin does not rise, the cooker may not reach full pressure and could switch to WARM mode prematurely. Ensuring the lid is properly locked, the sealing gasket is correctly installed, and the ingredients do not exceed the maximum fill line can help resolve this issue.
This answer is automatically generated