Table of Contents
Advertisement
MOTOR SETUP
86 OPERATION INSTRUCTIONS FOR DC CONTROLLER WITH LAMP CONTROL
① Indicator light
② Closing button
③ Stop button
④ Opening button
PARAMETERS
Product model
Input voltage
Load power
Recieving/ transmitting frequency
working temperature
Receiving sensitivity
Number of transmitters allowed
Operation mode
INSTALLATION NOTES
The main power source must be cut off before installation.
Transmission distance≤80 meters.
Please use soft wire and soft cable.
Avoid electrostatic interference, otherwise it will damage the
components.
Ensure that cable carriers are not affected by longitudinal forces
after installation.
Maintain a distance of:
• 1.5 meters between reciever and ground.
• 0.3 meters between reciever and ceiling.
• 1.5 meters between reciever and motor.
18
1
2
3
4
ZC31-03-2AD
AC100V-240V
Lamp≤500W—Motor≤48W
433.92MHz
-30°C~+65°C
-110dBm
≤8 pcs
Remote / manual control
CHARACTERISTICS
• Exquisite and unique appearance design;
• 86*86 national installation standards;
• Using impulse current relay;
• Adopting precision SMT process, surface moisture-proof
treatment;
• Parts of electrical apparatus meet the requirements of fire
safety standards for electrical standards;
• Power supply safety protection, the power output time is 5
minutes;
• Can be cooperated with all kinds of launchers and
tubular motors.
WIRING
lamp controlled DC receiver (ZC31-03-2AD)
ACTIVATING LOUVERS AND LIGHTS
INITIAL PROGRAMMING
Turn on electricity
Press on the lamp key for 5 seconds to turn on.
Press on the lamp key for 15 seconds to turn off.
Advertisement
Table of Contents
