Table of Contents
Advertisement
MOUNTING AND USAGE
STEP 9
Fix Ⓙ x4 (flat L-shaped aluminum profile).
One for each other of the slats is required.
3x3: Use bolt ⑥ x46, plastic spacer ⑦ x46 and nut ⑧ x46 to tighten
4x3: Use bolt ⑥ x64, plastic spacer ⑦ x64 and nut ⑧ x64 to tighten
Secure the louvers at each end.
NOTE: Do not over tighten. Over tightening will prevent louvers from moving.
16
Advertisement
Table of Contents
