Sensor - SK magic ACL-25C1A Manual

Sensor (Cleaning: Once every 4 weeks)
Dust outlet
Dust inlet
1. Remove the rear cover by slightly lifting it
upward and pulling it.
2. Remove the sensor cover.
•
3. Excess moisture on or around the
dust sensor may cause the product
Lens
to malfunction. Ensure all parts are
thoroughly dry before reassembling.
Cotton
swab
CAUTION
If not cleaned periodically, the performance
•
of the dust sensor may deteriorate.
The cleaning cycle varies depending on the
•
usage environment, so clean more often in
dusty environments.
First, clean the dust inlet, dust outlet,
and dust sensor detection component
first with a soft brush or cotton swab.
23