Wheel Cap Removal - SK magic ACL-25C1A Manual

Wheel Cap Removal

10
5. Attach the front cover by hooking the
cover onto the product and lowering the
cover downwards to reattach it.
It is easier to assemble by attaching
•
the front cover's lower hooks first.
Tilt the product slightly and remove the wheel
caps before use.
There are 4 wheel caps in total.
•
The product is equipped with wheels that
•
can move back and forth.
CAUTION
Be careful when moving the product via
•
wheels on surfaces like rugs, carpets, or
mats, as it may tip over and result in injury
or product damage.
When using without removing the wheel
•
cap, vibrations may occur in the product.
When removing the wheel caps, hold the
•
product firmly so that the product does not
slip or fall.
– If the product falls, it may result in
product failure and injury.