Hardware Installation - Intellinet 521802 Instruction Manual

Introduction

Hardware Installation

To install the print servers, you need to complete these
steps:
˙Confirm that your printer USB port(s) work well.
˙Connect the print server to the network and printer(s)
and plug in the print server.
˙Generate a configuration page from the print server.
Follow these instructions to install the print servers, please
refer to any peripheral you are connecting to the print
server:
1. To ensure your printer(s) work well, do one of the
following:
˙Send data through the USB port of each printer you are
connecting to the print server, or
˙Generate a printer self-test page.
2. Turn off the power for each printer.
3. Connect one end of the UTP cabling to the print server.
4. Connect the print server to printer(s).
Note: One port print server attaching only one printer,
further three ports print server can expand three
printers, for example, the print server's port1 should
be connect printer1, port2 or port3 as following
above step.
1 - 4