Configuration from Embedded Web Server
System Status
1. Click Status, it then appears the sub-menu.
2. Click System, it then as shown in the following picture.
Device Name: This option allows you to view device name
Contact: This option allows you to view contact name of
the print server. To check the print server's
contact name who in charge of this device.
Location: This option allows you to view Location name of
the print server. To confirm the print server's
location name where the print server is located
in the office's LAN.
Uptime: This option allows you to view uptime of the print
server. When you start the print server, it will
compute the print server from start time to power
off time.
Version: This option allows you to view firmware version of
the print server. To verify the print server's
firmware version is newer in this time.
5 - 4
of the print server. To correct the print
server's device name.