Table of Contents
Advertisement
Moving the Print Server to A New
Segment
If the print server is moved from one network segment to
another after the initial installation, through the Network
Print Port, the print server must be reconfigured on the
original Windows NT server or on each Windows 95/98
computer using this print server in order for the print
server's driver on each computer to re-establish a new
connection.
Print Server Reconfiguration Procedure on
Windows 95/98/Me
1.
Click Start on the bottom left hand corner of the
screen.
2.
Select Settings and select Printers.
3.
Select your printer connected to the print server, and
right-click the printer icon. Select Properties.
4.
Click Details tab.
5.
Click Port Settings as shown in the picture below.
The print server will be displayed on the next print
server's configuration screen.
Troubleshooting
9 - 7
Advertisement
Table of Contents
Troubleshooting
